/// `default_handle_control_message` will ensure that the port becomes

/// unblocked if so instructed by the receiving component. The returned

/// scheduling value must be used.

#[must_use]

pub(crate) fn default_send_data_message(

    exec_state: &mut CompExecState, transmitting_port_id: PortId,

    port_instruction: PortInstruction, value: ValueGroup,

    sched_ctx: &SchedulerCtx, consensus: &mut Consensus,

    control: &mut ControlLayer, comp_ctx: &mut CompCtx

) -> Result<CompScheduling, (PortInstruction, String)> {

    debug_assert_eq!(exec_state.mode, CompMode::Sync);

    let port_handle = comp_ctx.get_port_handle(transmitting_port_id);

    let port_info = comp_ctx.get_port_mut(port_handle);

    port_info.last_instruction = port_instruction;

    let port_info = comp_ctx.get_port(port_handle);

    debug_assert_eq!(port_info.kind, PortKind::Putter);

    let mut ports = Vec::new();

    find_ports_in_value_group(&value, &mut ports);

    if port_info.state.is_closed() {

        // Note: normally peer is eventually consistent, but if it has shut down

        // then we can be sure it is consistent (I think?)

        return Err((

            port_info.last_instruction,

            format!("Cannot send on this port, as the peer (id:{}) has shut down", port_info.peer_comp_id.0)

        ))

    } else if !ports.is_empty() {

        prepare_send_message_with_ports(

            transmitting_port_id, port_instruction, value, exec_state,

            comp_ctx, sched_ctx, control

        )?;

        return Ok(CompScheduling::Sleep);

    } else if port_info.state.is_blocked() {

        // Port is blocked, so we cannot send

        exec_state.set_as_blocked_put_without_ports(transmitting_port_id, value);

        return Ok(CompScheduling::Sleep);

    } else {

        // Port is not blocked and no ports to transfer: send to the peer

        let peer_handle = comp_ctx.get_peer_handle(port_info.peer_comp_id);

        let peer_info = comp_ctx.get_peer(peer_handle);

        let annotated_message = consensus.annotate_data_message(comp_ctx, port_info, value);

        peer_info.handle.send_message_logged(sched_ctx, Message::Data(annotated_message), true);

        return Ok(CompScheduling::Immediate);

    }

}

pub(crate) enum IncomingData {

    PlacedInSlot,

    SlotFull(DataMessage),

}

/// Default handling of receiving a data message. In case there is no room for

/// the message it is returned from this function. Note that this function is

/// different from PDL code performing a `get` on a port; this is the case where

/// the message first arrives at the component.

// NOTE: This is supposed to be a somewhat temporary implementation. It would be

//  nicest if the sending component can figure out it cannot send any more data.

#[must_use]

pub(crate) fn default_handle_incoming_data_message(

    exec_state: &mut CompExecState, inbox_main: &mut InboxMain,

    comp_ctx: &mut CompCtx, incoming_message: DataMessage,

    sched_ctx: &SchedulerCtx, control: &mut ControlLayer

) -> IncomingData {

    let port_handle = comp_ctx.get_port_handle(incoming_message.data_header.target_port);

    let port_index = comp_ctx.get_port_index(port_handle);

    comp_ctx.get_port_mut(port_handle).received_message_for_sync = true;

    let port_value_slot = &mut inbox_main[port_index];

    let target_port_id = incoming_message.data_header.target_port;

    if port_value_slot.is_none() {

        // We can put the value in the slot

        *port_value_slot = Some(incoming_message);

        // Check if we're blocked on receiving this message.

        dbg_code!({

            // Our port cannot have been blocked itself, because we're able to

            // directly insert the message into its slot.

            assert!(!comp_ctx.get_port(port_handle).state.is_blocked());

        });

        if exec_state.is_blocked_on_get(target_port_id) {

            // Return to normal operation

            exec_state.mode = CompMode::Sync;

            exec_state.mode_port = PortId::new_invalid();

            debug_assert!(exec_state.mode_value.values.is_empty());

        }

        return IncomingData::PlacedInSlot

    } else {

        // Slot is already full, so if the port was previously opened, it will

        // now become closed

        let port_info = comp_ctx.get_port_mut(port_handle);

        if port_info.state.is_open() {

            port_info.state.set(PortStateFlag::BlockedDueToFullBuffers);

            let (peer_handle, message) =

                control.initiate_port_blocking(comp_ctx, port_handle);

            let peer = comp_ctx.get_peer(peer_handle);

            peer.handle.send_message_logged(sched_ctx, Message::Control(message), true);

        }

        return IncomingData::SlotFull(incoming_message)

    }

}

pub(crate) enum GetResult {

    Received(DataMessage),

    NoMessage,

    Error((PortInstruction, String)),

}

/// Default attempt at trying to receive from a port (i.e. through a `get`, or

/// the equivalent operation for a builtin component). `target_port` is the port

/// we're trying to receive from, and the `target_port_instruction` is the

/// instruction we're attempting on this port.

pub(crate) fn default_attempt_get(

    exec_state: &mut CompExecState, target_port: PortId, target_port_instruction: PortInstruction,

    inbox_main: &mut InboxMain, inbox_backup: &mut InboxBackup, sched_ctx: &SchedulerCtx,

    comp_ctx: &mut CompCtx, control: &mut ControlLayer, consensus: &mut Consensus

) -> GetResult {

    let port_handle = comp_ctx.get_port_handle(target_port);

    let port_index = comp_ctx.get_port_index(port_handle);

    let port_info = comp_ctx.get_port_mut(port_handle);

    port_info.last_instruction = target_port_instruction;

    if port_info.state.is_closed() {

        let peer_id = port_info.peer_comp_id;

        return GetResult::Error((

            target_port_instruction,

            format!("Cannot get from this port, as the peer component (id:{}) closed the port", peer_id.0)

        ));

    }

    if let Some(message) = &inbox_main[port_index] {

        if consensus.try_receive_data_message(sched_ctx, comp_ctx, message) {

            // We're allowed to receive this message

            let mut message = inbox_main[port_index].take().unwrap();

            debug_assert_eq!(target_port, message.data_header.target_port);

            // Note: we can still run into an unrecoverable error when actually

            // receiving this message

            match default_handle_received_data_message(

                target_port, target_port_instruction,

                &mut message, inbox_main, inbox_backup,

                comp_ctx, sched_ctx, control,

            ) {

                Ok(()) => return GetResult::Received(message),

                Err(location_and_message) => return GetResult::Error(location_and_message)

            }

        } else {

            // We're not allowed to receive this message. This means that the

            // receiver is attempting to receive something out of order with

            // respect to the sender.

            return GetResult::Error((target_port_instruction, String::from(

                "Cannot get from this port, as this causes a deadlock. This happens if you `get` in a different order as another component `put`s"

            )));

        }

    } else {

        // We don't have a message waiting for us and the port is not blocked.

        // So enter the BlockedGet state

        exec_state.set_as_blocked_get(target_port);

        return GetResult::NoMessage;

    }

}

/// Default handling that has been received through a `get`. Will check if any

/// more messages are waiting, and if the corresponding port was blocked because

/// of full buffers (hence, will use the control layer to make sure the peer

/// will become unblocked).

pub(crate) fn default_handle_received_data_message(

    targeted_port: PortId, _port_instruction: PortInstruction, message: &mut DataMessage,

    inbox_main: &mut InboxMain, inbox_backup: &mut InboxBackup,

    comp_ctx: &mut CompCtx, sched_ctx: &SchedulerCtx, control: &mut ControlLayer

) -> Result<(), (PortInstruction, String)> {

    let port_handle = comp_ctx.get_port_handle(targeted_port);

    let port_index = comp_ctx.get_port_index(port_handle);

    debug_assert!(inbox_main[port_index].is_none()); // because we've just received from it

    // If we received any ports, add them to the port tracking and inbox struct.

    // Then notify the peers that they can continue sending to this port, but

    // now at a new address.

    for received_port in &mut message.ports {

        // Transfer messages to main/backup inbox

        let _new_inbox_index = inbox_main.len();

        if !received_port.messages.is_empty() {

            inbox_main.push(Some(received_port.messages.remove(0)));

            inbox_backup.extend(received_port.messages.drain(..));

        // Create a new port locally

        let mut new_port_state = received_port.state;

        new_port_state.set(PortStateFlag::Received);

        let new_port_handle = comp_ctx.add_port(

            received_port.peer_comp, received_port.peer_port,

            received_port.kind, new_port_state

        );

        debug_assert_eq!(_new_inbox_index, comp_ctx.get_port_index(new_port_handle));

        comp_ctx.change_port_peer(sched_ctx, new_port_handle, Some(received_port.peer_comp));

        let new_port = comp_ctx.get_port(new_port_handle);

        // Replace all references to the port in the received message

        for message_location in received_port.locations.iter().copied() {

            let value = match message_location {

                ValueId::Heap(heap_pos, heap_index) => &mut message.content.regions[heap_pos as usize][heap_index as usize],

                ValueId::Stack(stack_index) => &mut message.content.values[stack_index as usize],

            };

            match value {

                Value::Input(_) => {

                    debug_assert_eq!(new_port.kind, PortKind::Getter);

                    *value = Value::Input(port_id_to_eval(new_port.self_id));

                },

                Value::Output(_) => {

                    debug_assert_eq!(new_port.kind, PortKind::Putter);

                    *value = Value::Output(port_id_to_eval(new_port.self_id));

                },

                _ => unreachable!(),

            }

        }

        // Let the peer know that the port can now be used

        let peer_handle = comp_ctx.get_peer_handle(new_port.peer_comp_id);

        let peer_info = comp_ctx.get_peer(peer_handle);

        peer_info.handle.send_message_logged(sched_ctx, Message::Control(ControlMessage{

            id: ControlId::new_invalid(),

            sender_comp_id: comp_ctx.id,

            target_port_id: Some(new_port.peer_port_id),

            content: ControlMessageContent::PortPeerChangedUnblock(new_port.self_id, comp_ctx.id)

        }), true);

    }

    // Modify last-known location where port instruction was retrieved

    let port_info = comp_ctx.get_port(port_handle);

    debug_assert_ne!(port_info.last_instruction, PortInstruction::None); // set by caller

    debug_assert!(port_info.state.is_open()); // checked by caller

    // Check if there are any more messages in the backup buffer

    for message_index in 0..inbox_backup.len() {

        let message = &inbox_backup[message_index];

        if message.data_header.target_port == targeted_port {

            // One more message, place it in the slot

            let message = inbox_backup.remove(message_index);

            debug_assert!(comp_ctx.get_port(port_handle).state.is_blocked()); // since we're removing another message from the backup

            inbox_main[port_index] = Some(message);

            return Ok(());

        }

    }

    // Did not have any more messages, so if we were blocked, then we need to

    // unblock the port now (and inform the peer of this unblocking)

    if port_info.state.is_set(PortStateFlag::BlockedDueToFullBuffers) {

        let port_info = comp_ctx.get_port_mut(port_handle);

        port_info.state.clear(PortStateFlag::BlockedDueToFullBuffers);

        let (peer_handle, message) = control.cancel_port_blocking(comp_ctx, port_handle);

        let peer_info = comp_ctx.get_peer(peer_handle);

        peer_info.handle.send_message_logged(sched_ctx, Message::Control(message), true);

    }

    return Ok(());

}

/// Handles control messages in the default way. Note that this function may

/// take a lot of actions in the name of the caller: pending messages may be

/// sent, ports may become blocked/unblocked, etc. So the execution

/// (`CompExecState`), control (`ControlLayer`) and consensus (`Consensus`)

/// state may all change.

pub(crate) fn default_handle_control_message(

    exec_state: &mut CompExecState, control: &mut ControlLayer, consensus: &mut Consensus,

    message: ControlMessage, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx,

    inbox_main: &mut InboxMain, inbox_backup: &mut InboxBackup

) -> Result<(), (PortInstruction, String)> {

    match message.content {

        ControlMessageContent::Ack => {

            default_handle_ack(exec_state, control, message.id, sched_ctx, comp_ctx, consensus, inbox_main, inbox_backup);

        },

        ControlMessageContent::BlockPort => {

            // One of our messages was accepted, but the port should be

            // blocked.

            let port_to_block = message.target_port_id.unwrap();

            let port_handle = comp_ctx.get_port_handle(port_to_block);

            let port_info = comp_ctx.get_port_mut(port_handle);

            debug_assert_eq!(port_info.kind, PortKind::Putter);

            port_info.state.set(PortStateFlag::BlockedDueToFullBuffers);

        },

        ControlMessageContent::ClosePort(content) => {

            // Request to close the port. We immediately comply and remove

            // the component handle as well

            let port_to_close = message.target_port_id.unwrap();

            let port_handle = comp_ctx.get_port_handle(port_to_close);

            // We're closing the port, so we will always update the peer of the

            // port (in case of error messages)

            let port_info = comp_ctx.get_port_mut(port_handle);

            port_info.peer_comp_id = message.sender_comp_id;

            port_info.close_at_sync_end = true; // might be redundant (we might set it closed now)

            let peer_comp_id = port_info.peer_comp_id;

            let peer_handle = comp_ctx.get_peer_handle(peer_comp_id);

            // One exception to sending an `Ack` is if we just closed the

            // port ourselves, meaning that the `ClosePort` messages got

            // sent to one another.

            if let Some(control_id) = control.has_close_port_entry(port_handle, comp_ctx) {

                // The two components (sender and this component) are closing

                // the channel at the same time. So we don't care about the

                // content of the `ClosePort` message.

                default_handle_ack(exec_state, control, control_id, sched_ctx, comp_ctx, consensus, inbox_main, inbox_backup);

            } else {

                // Respond to the message

                let port_info = comp_ctx.get_port(port_handle);

                let last_instruction = port_info.last_instruction;

                let port_has_had_message = port_info.received_message_for_sync;

                default_send_ack(message.id, peer_handle, sched_ctx, comp_ctx);

                comp_ctx.change_port_peer(sched_ctx, port_handle, None);

                // Handle any possible error conditions (which boil down to: the

                // port has been used, but the peer has died). If not in sync

                // mode then we close the port immediately.

                // Note that `port_was_used` does not mean that any messages

                // were actually received. It might also mean that e.g. the

                // component attempted a `get`, but there were no messages, so

                // now it is in the `BlockedGet` state.

                let port_was_used = last_instruction != PortInstruction::None;

                if exec_state.mode.is_in_sync_block() {

                    let closed_during_sync_round = content.closed_in_sync_round && port_was_used;

                    let closed_before_sync_round = !content.closed_in_sync_round && !port_has_had_message && port_was_used;

                    if closed_during_sync_round || closed_before_sync_round {

                        return Err((

                            last_instruction,

                            format!("Peer component (id:{}) shut down, so communication cannot (have) succeed(ed)", peer_comp_id.0)

                        ));

                    }

                } else {

                    let port_info = comp_ctx.get_port_mut(port_handle);

                    port_info.state.set(PortStateFlag::Closed);

                }

            }

        },

        ControlMessageContent::UnblockPort => {

            // We were previously blocked (or already closed)

            let port_to_unblock = message.target_port_id.unwrap();

            let port_handle = comp_ctx.get_port_handle(port_to_unblock);

            let port_info = comp_ctx.get_port_mut(port_handle);

            debug_assert_eq!(port_info.kind, PortKind::Putter);

            debug_assert!(port_info.state.is_set(PortStateFlag::BlockedDueToFullBuffers));

            port_info.state.clear(PortStateFlag::BlockedDueToFullBuffers);

            default_handle_recently_unblocked_port(

                exec_state, consensus, port_handle, sched_ctx, comp_ctx,

                inbox_main, inbox_backup

            );

        },

        ControlMessageContent::PortPeerChangedBlock => {

            // The peer of our port has just changed. So we are asked to

            // temporarily block the port (while our original recipient is

            // potentially rerouting some of the in-flight messages) and

            // Ack. Then we wait for the `unblock` call.

            let port_to_change = message.target_port_id.unwrap();

            let port_handle = comp_ctx.get_port_handle(port_to_change);

            let port_info = comp_ctx.get_port_mut(port_handle);

            let peer_comp_id = port_info.peer_comp_id;

            port_info.state.set(PortStateFlag::BlockedDueToPeerChange);

            let peer_handle = comp_ctx.get_peer_handle(peer_comp_id);

            default_send_ack(message.id, peer_handle, sched_ctx, comp_ctx);

        },

        ControlMessageContent::PortPeerChangedUnblock(new_port_id, new_comp_id) => {

            let port_to_change = message.target_port_id.unwrap();

            let port_handle = comp_ctx.get_port_handle(port_to_change);

            let port_info = comp_ctx.get_port(port_handle);

            debug_assert!(port_info.state.is_set(PortStateFlag::BlockedDueToPeerChange));

use super::*;

#[test]

fn test_transfer_precreated_port_with_owned_peer() {

    compile_and_create_component("

    primitive port_sender(out<in<u32>> tx) {

        channel a -> b;

        sync put(tx, b);

    }

    primitive port_receiver(in<in<u32>> rx) {

        sync auto a = get(rx);

    }

    composite constructor() {

        channel a -> b;

        new port_sender(a);

        new port_receiver(b);

    }

    ", "constructor", no_args());

}

#[test]

fn test_transfer_precreated_port_with_foreign_peer() {

    compile_and_create_component("

    primitive port_sender(out<in<u32>> tx, in<u32> to_send) {

        sync put(tx, to_send);

    }

    primitive port_receiver(in<in<u32>> rx) {

        sync auto a = get(rx);

    }

    composite constructor() {

        channel tx -> rx;

        channel forgotten -> to_send;

        new port_sender(tx, to_send);

        new port_receiver(rx);

    }

    ", "constructor", no_args());

}

#[test]

fn test_transfer_synccreated_port() {

    compile_and_create_component("

    primitive port_sender(out<in<u32>> tx) {

        sync {

            channel a -> b;

            put(tx, b);

        }

    }

    primitive port_receiver(in<in<u32>> rx) {

        sync auto a = get(rx);

    }

    composite constructor() {

        channel a -> b;

        new port_sender(a);

        new port_receiver(b);

    }

    ", "constructor", no_args());

}

#[test]

fn test_transfer_precreated_port_with_owned_peer_back_and_forth() {

}

#[test]

fn test_transfer_precreated_port_with_foreign_peer_back_and_forth() {

}

#[test]

fn test_transfer_precreated_port_with_owned_peer_and_communication() {

}

#[test]

fn test_transfer_precreated_port_with_foreign_peer_and_communication() {

}