CSY/reowolf Changeset - a5594f90afa6 · Centrum Wiskunde & Informatica (CWI)

Changeset - a5594f90afa6

Parent rev.

Child rev.

[Not reviewed]

0 3 0

mh - 3 years ago 2022-03-23 14:29:24
contact@maxhenger.nl

Fix bug in select statement

3 files changed with 25 insertions and 2 deletions:

src/runtime2/component/component_ip.rs

src/runtime2/component/component_pdl.rs

src/runtime2/component/mod.rs

0 comments (0 inline, 0 general)

src/runtime2/component/component_ip.rs

➞

Show inline comments

 use crate::protocol::eval::*;
 use crate::runtime2::*;
 use super::*;
 /// TODO: Temporary component to figure out what to do with custom components.
 ///     This component sends random numbers between two u32 limits
 struct ComponentRandSend {
+}
 impl Component for ComponentRandSend {
     fn adopt_message(&mut self, _comp_ctx: &mut CompCtx, _message: DataMessage) {
         unreachable!("should not adopt messages");
+    }
     fn handle_message(&mut self, sched_ctx: &mut SchedulerCtx, comp_ctx: &mut CompCtx, message: Message) {
         todo!()
+    }
     fn run(&mut self, sched_ctx: &mut SchedulerCtx, comp_ctx: &mut CompCtx) -> Result<CompScheduling, EvalError> {
         todo!()
+    }
+}
@@ \ No newline at end of file @@

src/runtime2/component/component_pdl.rs

➞

Show inline comments

 use crate::random::Random;
 use crate::protocol::*;
 use crate::protocol::ast::ProcedureDefinitionId;
 use crate::protocol::eval::{
     PortId as EvalPortId, Prompt,
     ValueGroup, Value,
     EvalContinuation, EvalResult, EvalError
 };
 use crate::runtime2::scheduler::SchedulerCtx;
 use crate::runtime2::communication::*;
 use super::component::*;
 use super::component_context::*;
 use super::control_layer::*;
 use super::consensus::Consensus;
 pub enum ExecStmt {
     CreatedChannel((Value, Value)),
     PerformedPut,
     PerformedGet(ValueGroup),
     PerformedSelectWait(u32),
     None,
+}
 impl ExecStmt {
     fn take(&mut self) -> ExecStmt {
         let mut value = ExecStmt::None;
         std::mem::swap(self, &mut value);
         return value;
+    }
     fn is_none(&self) -> bool {
         match self {
             ExecStmt::None => return true,
             _ => return false,
+        }
+    }
+}
 pub struct ExecCtx {
     stmt: ExecStmt,
+}
 impl RunContext for ExecCtx {
     fn performed_put(&mut self, _port: EvalPortId) -> bool {
         match self.stmt.take() {
             ExecStmt::None => return false,
             ExecStmt::PerformedPut => return true,
             _ => unreachable!(),
+        }
+    }
     fn performed_get(&mut self, _port: EvalPortId) -> Option<ValueGroup> {
         match self.stmt.take() {
             ExecStmt::None => return None,
             ExecStmt::PerformedGet(value) => return Some(value),
             _ => unreachable!(),
+        }
+    }
     fn fires(&mut self, _port: EvalPortId) -> Option<Value> {
         todo!("remove fires")
+    }
     fn performed_fork(&mut self) -> Option<bool> {
         todo!("remove fork")
+    }
     fn created_channel(&mut self) -> Option<(Value, Value)> {
         match self.stmt.take() {
             ExecStmt::None => return None,
             ExecStmt::CreatedChannel(ports) => return Some(ports),
             _ => unreachable!(),
+        }
+    }
     fn performed_select_wait(&mut self) -> Option<u32> {
         match self.stmt.take() {
             ExecStmt::None => return None,
             ExecStmt::PerformedSelectWait(selected_case) => Some(selected_case),
             _v => unreachable!(),
+        }
+    }
+}
 #[derive(Debug, Copy, Clone, PartialEq, Eq)]
 pub(crate) enum Mode {
     NonSync, // not in sync mode
     Sync, // in sync mode, can interact with other components
     SyncEnd, // awaiting a solution, i.e. encountered the end of the sync block
     BlockedGet, // blocked because we need to receive a message on a particular port
     BlockedPut, // component is blocked because the port is blocked
     BlockedSelect, // waiting on message to complete the select statement
     StartExit, // temporary state: if encountered then we start the shutdown process
     BusyExit, // temporary state: waiting for Acks for all the closed ports
     Exit, // exiting: shutdown process started, now waiting until the reference count drops to 0
+}
 impl Mode {
     fn is_in_sync_block(&self) -> bool {
         use Mode::*;
         match self {
             Sync | SyncEnd | BlockedGet | BlockedPut | BlockedSelect => true,
             NonSync | StartExit | BusyExit | Exit => false,
+        }
+    }
+}
 struct SelectCase {
     involved_ports: Vec<LocalPortHandle>,
+}
 // TODO: @Optimize, flatten cases into single array, have index-pointers to next case
 struct SelectState {
     cases: Vec<SelectCase>,
     next_case: u32,
     num_cases: u32,
     random: Random,
     candidates_workspace: Vec<usize>,
+}
 enum SelectDecision {
     None,
     Case(u32), // contains case index, should be passed along to PDL code
+}
 type InboxMain = Vec<Option<DataMessage>>;
 impl SelectState {
     fn new() -> Self {
         return Self{
             cases: Vec::new(),
             next_case: 0,
             num_cases: 0,
             random: Random::new(),
             candidates_workspace: Vec::new(),
+        }
+    }
     fn handle_select_start(&mut self, num_cases: u32) {
         self.cases.clear();
         self.next_case = 0;
         self.num_cases = num_cases;
+    }
     /// Register a port as belonging to a particular case. As for correctness of
     /// PDL code one cannot register the same port twice, this function might
     /// return an error
     fn register_select_case_port(&mut self, comp_ctx: &CompCtx, case_index: u32, _port_index: u32, port_id: PortId) -> Result<(), PortId> {
         // Retrieve case and port handle
         self.ensure_at_case(case_index);
         let cur_case = &mut self.cases[case_index as usize];
         let port_handle = comp_ctx.get_port_handle(port_id);
         debug_assert_eq!(cur_case.involved_ports.len(), _port_index as usize);
         // Make sure port wasn't added before, we disallow having the same port
         // in the same select guard twice.
         if cur_case.involved_ports.contains(&port_handle) {
             return Err(port_id);
+        }
         cur_case.involved_ports.push(port_handle);
         return Ok(());
+    }
     /// Notification that all ports have been registered and we should now wait
     /// until the appropriate messages have come in.
     fn handle_select_waiting_point(&mut self, inbox: &InboxMain, comp_ctx: &CompCtx) -> SelectDecision {
         if self.num_cases != self.next_case {
             // This happens when there are >=1 select cases written at the end
             // of the select block.
             self.ensure_at_case(self.num_cases - 1);
+        }
         return self.has_decision(inbox, comp_ctx);
+    }
     fn handle_updated_inbox(&mut self, inbox: &InboxMain, comp_ctx: &CompCtx) -> SelectDecision {
         return self.has_decision(inbox, comp_ctx);
+    }
     /// Internal helper, pushes empty cases inbetween last case and provided new
     /// case index.
     fn ensure_at_case(&mut self, new_case_index: u32) {
         // Push an empty case for all intermediate cases that were not
         // registered with a port.
         debug_assert!(new_case_index >= self.next_case && new_case_index < self.num_cases);
         for _ in self.next_case..new_case_index + 1 {
             self.cases.push(SelectCase{ involved_ports: Vec::new() });
+        }
         self.next_case = new_case_index + 1;
+    }
     /// Checks if a decision can be reached
     fn has_decision(&mut self, inbox: &InboxMain, comp_ctx: &CompCtx) -> SelectDecision {
         self.candidates_workspace.clear();
         if self.cases.is_empty() {
             // If there are no cases then we can immediately reach a "bogus
             // decision".
             return SelectDecision::Case(0);
+        }
         // Need to check for valid case
         'case_loop: for (case_index, case) in self.cases.iter().enumerate() {
             for port_handle in case.involved_ports.iter().copied() {
                 let port_index = comp_ctx.get_port_index(port_handle);
                 if inbox[port_index].is_none() {
                     // Condition not satisfied
                     continue 'case_loop;
+                }
+            }
             // If here then the case guard is satisfied
             self.candidates_workspace.push(case_index);
+        }
         if self.candidates_workspace.is_empty() {
             return SelectDecision::None;
         } else {
             let candidate_index = self.random.get_u64() as usize % self.candidates_workspace.len();
             return SelectDecision::Case(self.candidates_workspace[candidate_index] as u32);
+        }
+    }
+}
 pub(crate) struct CompPDL {
     pub mode: Mode,
     pub mode_port: PortId, // when blocked on a port
     pub mode_value: ValueGroup, // when blocked on a put
     select: SelectState,
     pub prompt: Prompt,
     pub control: ControlLayer,
     pub consensus: Consensus,
     pub sync_counter: u32,
     pub exec_ctx: ExecCtx,
     // TODO: Temporary field, simulates future plans of having one storage place
     //  reserved per port.
     // Should be same length as the number of ports. Corresponding indices imply
     // message is intended for that port.
     pub inbox_main: InboxMain,
     pub inbox_backup: Vec<DataMessage>,
+}
 impl Component for CompPDL {
     fn adopt_message(&mut self, comp_ctx: &mut CompCtx, message: DataMessage) {
         let port_handle = comp_ctx.get_port_handle(message.data_header.target_port);
         let port_index = comp_ctx.get_port_index(port_handle);
         if self.inbox_main[port_index].is_none() {
             self.inbox_main[port_index] = Some(message);
         } else {
             self.inbox_backup.push(message);
+        }
+    }
     fn handle_message(&mut self, sched_ctx: &mut SchedulerCtx, comp_ctx: &mut CompCtx, mut message: Message) {
         sched_ctx.log(&format!("handling message: {:#?}", message));
         if let Some(new_target) = self.control.should_reroute(&mut message) {
             let mut target = sched_ctx.runtime.get_component_public(new_target);
             target.send_message(sched_ctx, message, false); // not waking up: we schedule once we've received all PortPeerChanged Acks
             let _should_remove = target.decrement_users();
             debug_assert!(_should_remove.is_none());
             return;
+        }
         match message {
             Message::Data(message) => {
                 self.handle_incoming_data_message(sched_ctx, comp_ctx, message);
             },
             Message::Control(message) => {
                 self.handle_incoming_control_message(sched_ctx, comp_ctx, message);
             },
             Message::Sync(message) => {
                 self.handle_incoming_sync_message(sched_ctx, comp_ctx, message);
+            }
+        }
+    }
     fn run(&mut self, sched_ctx: &mut SchedulerCtx, comp_ctx: &mut CompCtx) -> Result<CompScheduling, EvalError> {
         use EvalContinuation as EC;
         sched_ctx.log(&format!("Running component (mode: {:?})", self.mode));
         // Depending on the mode don't do anything at all, take some special
         // actions, or fall through and run the PDL code.
         match self.mode {
-            Mode::NonSync | Mode::Sync | Mode::BlockedSelect => {
             Mode::NonSync | Mode::Sync => {
                 // continue and run PDL code
             },
             Mode::SyncEnd | Mode::BlockedGet | Mode::BlockedPut => {
+            Mode::SyncEnd | Mode::BlockedGet | Mode::BlockedPut | Mode::BlockedSelect => {
                 return Ok(CompScheduling::Sleep);
+            }
             Mode::StartExit => {
                 self.handle_component_exit(sched_ctx, comp_ctx);
                 return Ok(CompScheduling::Immediate);
             },
             Mode::BusyExit => {
                 if self.control.has_acks_remaining() {
                     return Ok(CompScheduling::Sleep);
                 } else {
                     self.mode = Mode::Exit;
                     return Ok(CompScheduling::Exit);
+                }
             },
             Mode::Exit => {
                 return Ok(CompScheduling::Exit);
+            }
+        }
         let run_result = self.execute_prompt(&sched_ctx)?;
         match run_result {
             EC::Stepping => unreachable!(), // execute_prompt runs until this is no longer returned
             EC::BranchInconsistent | EC::NewFork | EC::BlockFires(_) => todo!("remove these"),
             // Results that can be returned in sync mode
             EC::SyncBlockEnd => {
                 debug_assert_eq!(self.mode, Mode::Sync);
                 self.handle_sync_end(sched_ctx, comp_ctx);
                 return Ok(CompScheduling::Immediate);
             },
             EC::BlockGet(port_id) => {
                 debug_assert_eq!(self.mode, Mode::Sync);
                 debug_assert!(self.exec_ctx.stmt.is_none());
                 let port_id = port_id_from_eval(port_id);
                 let port_handle = comp_ctx.get_port_handle(port_id);
                 let port_index = comp_ctx.get_port_index(port_handle);
                 if let Some(message) = &self.inbox_main[port_index] {
                     // Check if we can actually receive the message
                     if self.consensus.try_receive_data_message(sched_ctx, comp_ctx, message) {
                         // Message was received. Make sure any blocked peers and
                         // pending messages are handled.
                         let message = self.inbox_main[port_index].take().unwrap();
                         self.handle_received_data_message(sched_ctx, comp_ctx, port_handle);
                         self.exec_ctx.stmt = ExecStmt::PerformedGet(message.content);
                         return Ok(CompScheduling::Immediate);
                     } else {
                         todo!("handle sync failure due to message deadlock");
                         return Ok(CompScheduling::Sleep);
+                    }
                 } else {
                     // We need to wait
                     self.mode = Mode::BlockedGet;
                     self.mode_port = port_id;
                     return Ok(CompScheduling::Sleep);
+                }
             },
             EC::Put(port_id, value) => {
                 debug_assert_eq!(self.mode, Mode::Sync);
                 sched_ctx.log(&format!("Putting value {:?}", value));
                 let port_id = port_id_from_eval(port_id);
                 let port_handle = comp_ctx.get_port_handle(port_id);
                 let port_info = comp_ctx.get_port(port_handle);
                 if port_info.state.is_blocked() {
                     self.mode = Mode::BlockedPut;
                     self.mode_port = port_id;
                     self.mode_value = value;
                     self.exec_ctx.stmt = ExecStmt::PerformedPut; // prepare for when we become unblocked
                     return Ok(CompScheduling::Sleep);
                 } else {
                     self.send_data_message_and_wake_up(sched_ctx, comp_ctx, port_handle, value);
                     self.exec_ctx.stmt = ExecStmt::PerformedPut;
                     return Ok(CompScheduling::Immediate);
+                }
             },
             EC::SelectStart(num_cases, _num_ports) => {
                 debug_assert_eq!(self.mode, Mode::Sync);
                 self.select.handle_select_start(num_cases);
                 return Ok(CompScheduling::Requeue);
             },
             EC::SelectRegisterPort(case_index, port_index, port_id) => {
                 debug_assert_eq!(self.mode, Mode::Sync);
                 let port_id = port_id_from_eval(port_id);
                 if let Err(_err) = self.select.register_select_case_port(comp_ctx, case_index, port_index, port_id) {
                     todo!("handle registering a port multiple times");
+                }
                 return Ok(CompScheduling::Immediate);
             },
             EC::SelectWait => {
                 debug_assert_eq!(self.mode, Mode::Sync);
                 let select_decision = self.select.handle_select_waiting_point(&self.inbox_main, comp_ctx);
                 if let SelectDecision::Case(case_index) = select_decision {
                     // Reached a conclusion, so we can continue immediately
                     self.exec_ctx.stmt = ExecStmt::PerformedSelectWait(case_index);
                     self.mode = Mode::Sync;
                     return Ok(CompScheduling::Immediate);
                 } else {
                     // No decision yet
                     self.mode = Mode::BlockedSelect;
                     return Ok(CompScheduling::Sleep);
+                }
             },
             // Results that can be returned outside of sync mode
             EC::ComponentTerminated => {
                 self.mode = Mode::StartExit; // next call we'll take care of the exit
                 return Ok(CompScheduling::Immediate);
             },
             EC::SyncBlockStart => {
                 debug_assert_eq!(self.mode, Mode::NonSync);
                 self.handle_sync_start(sched_ctx, comp_ctx);
                 return Ok(CompScheduling::Immediate);
             },
             EC::NewComponent(definition_id, type_id, arguments) => {
                 debug_assert_eq!(self.mode, Mode::NonSync);
                 self.create_component_and_transfer_ports(
                     sched_ctx, comp_ctx,
                     definition_id, type_id, arguments
                 );
                 return Ok(CompScheduling::Requeue);
             },
             EC::NewChannel => {
                 debug_assert_eq!(self.mode, Mode::NonSync);
                 debug_assert!(self.exec_ctx.stmt.is_none());
                 let channel = comp_ctx.create_channel();
                 self.exec_ctx.stmt = ExecStmt::CreatedChannel((
                     Value::Output(port_id_to_eval(channel.putter_id)),
                     Value::Input(port_id_to_eval(channel.getter_id))
                 ));
                 self.inbox_main.push(None);
                 self.inbox_main.push(None);
                 return Ok(CompScheduling::Immediate);
+            }
+        }
+    }
+}
 impl CompPDL {
     pub(crate) fn new(initial_state: Prompt, num_ports: usize) -> Self {
         let mut inbox_main = Vec::new();
         inbox_main.reserve(num_ports);
         for _ in 0..num_ports {
             inbox_main.push(None);
+        }
         return Self{
             mode: Mode::NonSync,
             mode_port: PortId::new_invalid(),
             mode_value: ValueGroup::default(),
             select: SelectState::new(),
             prompt: initial_state,
             control: ControlLayer::default(),
             consensus: Consensus::new(),
             sync_counter: 0,
             exec_ctx: ExecCtx{
                 stmt: ExecStmt::None,
             },
             inbox_main,
             inbox_backup: Vec::new(),
+        }
+    }
     // -------------------------------------------------------------------------
     // Running component and handling changes in global component state
     // -------------------------------------------------------------------------
     fn execute_prompt(&mut self, sched_ctx: &SchedulerCtx) -> EvalResult {
         let mut step_result = EvalContinuation::Stepping;
         while let EvalContinuation::Stepping = step_result {
             step_result = self.prompt.step(
                 &sched_ctx.runtime.protocol.types, &sched_ctx.runtime.protocol.heap,
                 &sched_ctx.runtime.protocol.modules, &mut self.exec_ctx,
             )?;
+        }
         return Ok(step_result)
+    }
     fn handle_sync_start(&mut self, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx) {
         sched_ctx.log("Component starting sync mode");
         self.consensus.notify_sync_start(comp_ctx);
         for message in self.inbox_main.iter() {
             if let Some(message) = message {
                 self.consensus.handle_new_data_message(comp_ctx, message);
+            }
+        }
         debug_assert_eq!(self.mode, Mode::NonSync);
         self.mode = Mode::Sync;
+    }
     /// Handles end of sync. The conclusion to the sync round might arise
     /// immediately (and be handled immediately), or might come later through
     /// messaging. In any case the component should be scheduled again
     /// immediately
     fn handle_sync_end(&mut self, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx) {
         sched_ctx.log("Component ending sync mode (now waiting for solution)");
         let decision = self.consensus.notify_sync_end(sched_ctx, comp_ctx);
         self.mode = Mode::SyncEnd;
         self.handle_sync_decision(sched_ctx, comp_ctx, decision);
+    }
     /// Handles decision from the consensus round. This will cause a change in
     /// the internal `Mode`, such that the next call to `run` can take the
     /// appropriate next steps.
     fn handle_sync_decision(&mut self, sched_ctx: &SchedulerCtx, _comp_ctx: &mut CompCtx, decision: SyncRoundDecision) {
         sched_ctx.log(&format!("Handling sync decision: {:?} (in mode {:?})", decision, self.mode));
         let is_success = match decision {
             SyncRoundDecision::None => {
                 // No decision yet
                 return;
             },
             SyncRoundDecision::Solution => true,
             SyncRoundDecision::Failure => false,
         };
         // If here then we've reached a decision
         debug_assert_eq!(self.mode, Mode::SyncEnd);
         if is_success {
             self.mode = Mode::NonSync;
             self.consensus.notify_sync_decision(decision);
         } else {
             self.mode = Mode::StartExit;
+        }
+    }
     fn handle_component_exit(&mut self, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx) {
         sched_ctx.log("Component exiting");
         debug_assert_eq!(self.mode, Mode::StartExit);
         self.mode = Mode::BusyExit;
         // Doing this by index, then retrieving the handle is a bit rediculous,
         // but Rust is being Rust with its borrowing rules.
         for port_index in 0..comp_ctx.num_ports() {
             let port = comp_ctx.get_port_by_index_mut(port_index);
             if port.state == PortState::Closed {
                 // Already closed, or in the process of being closed
                 continue;
+            }
             // Mark as closed
             let port_id = port.self_id;
             port.state = PortState::Closed;
             // Notify peer of closing
             let port_handle = comp_ctx.get_port_handle(port_id);
             let (peer, message) = self.control.initiate_port_closing(port_handle, comp_ctx);
             let peer_info = comp_ctx.get_peer(peer);
             peer_info.handle.send_message(sched_ctx, Message::Control(message), true);
+        }
+    }
     // -------------------------------------------------------------------------
     // Handling messages
     // -------------------------------------------------------------------------
     fn send_data_message_and_wake_up(&mut self, sched_ctx: &SchedulerCtx, comp_ctx: &CompCtx, source_port_handle: LocalPortHandle, value: ValueGroup) {
         let port_info = comp_ctx.get_port(source_port_handle);
         let peer_handle = comp_ctx.get_peer_handle(port_info.peer_comp_id);
         let peer_info = comp_ctx.get_peer(peer_handle);
         let annotated_message = self.consensus.annotate_data_message(comp_ctx, port_info, value);
         peer_info.handle.send_message(sched_ctx, Message::Data(annotated_message), true);
+    }
     /// Handles a message that came in through the public inbox. This function
     /// will handle putting it in the correct place, and potentially blocking
     /// the port in case too many messages are being received.
     fn handle_incoming_data_message(&mut self, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx, message: DataMessage) {
         // Whatever we do, glean information from headers in message
         if self.mode.is_in_sync_block() {
             self.consensus.handle_new_data_message(comp_ctx, &message);
+        }
         // Check if we can insert it directly into the storage associated with
         // the port
         let target_port_id = message.data_header.target_port;
         let port_handle = comp_ctx.get_port_handle(target_port_id);
         let port_index = comp_ctx.get_port_index(port_handle);
         if self.inbox_main[port_index].is_none() {
             self.inbox_main[port_index] = Some(message);
             // After direct insertion, check if this component's execution is
             // blocked on receiving a message on that port
             debug_assert!(!comp_ctx.get_port(port_handle).state.is_blocked()); // because we could insert directly
             if self.mode == Mode::BlockedGet && self.mode_port == target_port_id {
                 // We were indeed blocked
                 self.mode = Mode::Sync;
                 self.mode_port = PortId::new_invalid();
             } else if self.mode == Mode::BlockedSelect {
                 let select_decision = self.select.handle_updated_inbox(&self.inbox_main, comp_ctx);
                 if let SelectDecision::Case(case_index) = select_decision {
                     self.exec_ctx.stmt = ExecStmt::PerformedSelectWait(case_index);
                     self.mode = Mode::Sync;
+                }
+            }
             return;
+        }
         // The direct inbox is full, so the port will become (or was already) blocked
         let port_info = comp_ctx.get_port_mut(port_handle);
         debug_assert!(port_info.state == PortState::Open || port_info.state.is_blocked());
         if port_info.state == PortState::Open {
             comp_ctx.set_port_state(port_handle, PortState::BlockedDueToFullBuffers);
             let (peer_handle, message) =
                 self.control.initiate_port_blocking(comp_ctx, port_handle);
             let peer = comp_ctx.get_peer(peer_handle);
             peer.handle.send_message(sched_ctx, Message::Control(message), true);
+        }
         // But we still need to remember the message, so:
         self.inbox_backup.push(message);
+    }
     /// Handles when a message has been handed off from the inbox to the PDL
     /// code. We check to see if there are more messages waiting and, if not,
     /// then we handle the case where the port might have been blocked
     /// previously.
     fn handle_received_data_message(&mut self, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx, port_handle: LocalPortHandle) {
         let port_index = comp_ctx.get_port_index(port_handle);
         debug_assert!(self.inbox_main[port_index].is_none()); // this function should be called after the message is taken out
         // Check for any more messages
         let port_info = comp_ctx.get_port(port_handle);
         for message_index in 0..self.inbox_backup.len() {
             let message = &self.inbox_backup[message_index];
             if message.data_header.target_port == port_info.self_id {
                 // One more message for this port
                 let message = self.inbox_backup.remove(message_index);
                 debug_assert!(comp_ctx.get_port(port_handle).state.is_blocked()); // since we had >1 message on the port
                 self.inbox_main[port_index] = Some(message);
                 return;
+            }
+        }
         // Did not have any more messages. So if we were blocked, then we need
         // to send the "unblock" message.
         if port_info.state == PortState::BlockedDueToFullBuffers {
             comp_ctx.set_port_state(port_handle, PortState::Open);
             let (peer_handle, message) = self.control.cancel_port_blocking(comp_ctx, port_handle);
             let peer_info = comp_ctx.get_peer(peer_handle);
             peer_info.handle.send_message(sched_ctx, Message::Control(message), true);
+        }
+    }
     fn handle_incoming_control_message(&mut self, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx, message: ControlMessage) {
         // Little local utility to send an Ack
         fn send_control_ack_message(sched_ctx: &SchedulerCtx, comp_ctx: &CompCtx, causer_id: ControlId, peer_handle: LocalPeerHandle) {
             let peer_info = comp_ctx.get_peer(peer_handle);
             peer_info.handle.send_message(sched_ctx, Message::Control(ControlMessage{
                 id: causer_id,
                 sender_comp_id: comp_ctx.id,
                 target_port_id: None,
                 content: ControlMessageContent::Ack,
             }), true);
+        }
         // Handle the content of the control message, and optionally Ack it
         match message.content {
             ControlMessageContent::Ack => {
                 self.handle_ack(sched_ctx, comp_ctx, message.id);
             },
             ControlMessageContent::BlockPort(port_id) => {
                 // On of our messages was accepted, but the port should be
                 // blocked.
                 let port_handle = comp_ctx.get_port_handle(port_id);
                 let port_info = comp_ctx.get_port(port_handle);
                 debug_assert_eq!(port_info.kind, PortKind::Putter);
                 if port_info.state == PortState::Open {
                     // only when open: we don't do this when closed, and we we don't do this if we're blocked due to peer changes
                     comp_ctx.set_port_state(port_handle, PortState::BlockedDueToFullBuffers);
+                }
             },
             ControlMessageContent::ClosePort(port_id) => {
                 // Request to close the port. We immediately comply and remove
                 // the component handle as well
                 let port_handle = comp_ctx.get_port_handle(port_id);
                 let peer_comp_id = comp_ctx.get_port(port_handle).peer_comp_id;
                 let peer_handle = comp_ctx.get_peer_handle(peer_comp_id);
                 // One exception to sending an `Ack` is if we just closed the
                 // port ourselves, meaning that the `ClosePort` messages got
                 // sent to one another.
                 if let Some(control_id) = self.control.has_close_port_entry(port_handle, comp_ctx) {
                     self.handle_ack(sched_ctx, comp_ctx, control_id);
                 } else {
                     send_control_ack_message(sched_ctx, comp_ctx, message.id, peer_handle);
                     comp_ctx.remove_peer(sched_ctx, port_handle, peer_comp_id, false); // do not remove if closed
                     comp_ctx.set_port_state(port_handle, PortState::Closed); // now set to closed
+                }
             },
             ControlMessageContent::UnblockPort(port_id) => {
                 // We were previously blocked (or already closed)
                 let port_handle = comp_ctx.get_port_handle(port_id);
                 let port_info = comp_ctx.get_port(port_handle);
                 debug_assert_eq!(port_info.kind, PortKind::Putter);
                 if port_info.state == PortState::BlockedDueToFullBuffers {
                     self.handle_unblock_port_instruction(sched_ctx, comp_ctx, port_handle);
+                }
             },
             ControlMessageContent::PortPeerChangedBlock(port_id) => {
                 // The peer of our port has just changed. So we are asked to
                 // temporarily block the port (while our original recipient is
                 // potentially rerouting some of the in-flight messages) and
                 // Ack. Then we wait for the `unblock` call.
                 debug_assert_eq!(message.target_port_id, Some(port_id));
                 let port_handle = comp_ctx.get_port_handle(port_id);
                 comp_ctx.set_port_state(port_handle, PortState::BlockedDueToPeerChange);
                 let port_info = comp_ctx.get_port(port_handle);
                 let peer_handle = comp_ctx.get_peer_handle(port_info.peer_comp_id);
                 send_control_ack_message(sched_ctx, comp_ctx, message.id, peer_handle);
             },
             ControlMessageContent::PortPeerChangedUnblock(new_port_id, new_comp_id) => {
                 let port_handle = comp_ctx.get_port_handle(message.target_port_id.unwrap());
                 let port_info = comp_ctx.get_port(port_handle);
                 debug_assert!(port_info.state == PortState::BlockedDueToPeerChange);
                 let old_peer_id = port_info.peer_comp_id;
                 comp_ctx.remove_peer(sched_ctx, port_handle, old_peer_id, false);
                 let port_info = comp_ctx.get_port_mut(port_handle);
                 port_info.peer_comp_id = new_comp_id;
                 port_info.peer_port_id = new_port_id;
                 comp_ctx.add_peer(port_handle, sched_ctx, new_comp_id, None);
                 self.handle_unblock_port_instruction(sched_ctx, comp_ctx, port_handle);
+            }
+        }
+    }
     fn handle_incoming_sync_message(&mut self, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx, message: SyncMessage) {
         let decision = self.consensus.receive_sync_message(sched_ctx, comp_ctx, message);
         self.handle_sync_decision(sched_ctx, comp_ctx, decision);
+    }
     /// Little helper that notifies the control layer of an `Ack`, and takes the
     /// appropriate subsequent action
     fn handle_ack(&mut self, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx, control_id: ControlId) {
         let mut to_ack = control_id;
         loop {
             let (action, new_to_ack) = self.control.handle_ack(to_ack, sched_ctx, comp_ctx);
             match action {
                 AckAction::SendMessage(target_comp, message) => {
                     // FIX @NoDirectHandle
                     let mut handle = sched_ctx.runtime.get_component_public(target_comp);
                     handle.send_message(sched_ctx, Message::Control(message), true);
                     let _should_remove = handle.decrement_users();
                     debug_assert!(_should_remove.is_none());
                 },
                 AckAction::ScheduleComponent(to_schedule) => {
                     // FIX @NoDirectHandle
                     let mut handle = sched_ctx.runtime.get_component_public(to_schedule);
                     // Note that the component is intentionally not
                     // sleeping, so we just wake it up
                     debug_assert!(!handle.sleeping.load(std::sync::atomic::Ordering::Acquire));
                     let key = unsafe{ to_schedule.upgrade() };
                     sched_ctx.runtime.enqueue_work(key);
                     let _should_remove = handle.decrement_users();
                     debug_assert!(_should_remove.is_none());
                 },
                 AckAction::None => {}
+            }
             match new_to_ack {
                 Some(new_to_ack) => to_ack = new_to_ack,
                 None => break,
+            }
+        }
+    }
     // -------------------------------------------------------------------------
     // Handling ports
     // -------------------------------------------------------------------------
     /// Unblocks a port, potentially continuing execution of the component, in
     /// response to a message that told us to unblock a previously blocked
     fn handle_unblock_port_instruction(&mut self, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx, port_handle: LocalPortHandle) {
         let port_info = comp_ctx.get_port_mut(port_handle);
         let port_id = port_info.self_id;
         debug_assert!(port_info.state.is_blocked());
         port_info.state = PortState::Open;
         if self.mode == Mode::BlockedPut && port_id == self.mode_port {
             // We were blocked on the port that just became unblocked, so
             // send the message.
             debug_assert_eq!(port_info.kind, PortKind::Putter);
             let mut replacement = ValueGroup::default();
             std::mem::swap(&mut replacement, &mut self.mode_value);
             self.send_data_message_and_wake_up(sched_ctx, comp_ctx, port_handle, replacement);
             self.mode = Mode::Sync;
             self.mode_port = PortId::new_invalid();
+        }
+    }
     fn create_component_and_transfer_ports(
         &mut self,
         sched_ctx: &SchedulerCtx, creator_ctx: &mut CompCtx,
         definition_id: ProcedureDefinitionId, type_id: TypeId, mut arguments: ValueGroup
     ) {
         struct PortPair{
             creator_handle: LocalPortHandle,
             creator_id: PortId,
             created_handle: LocalPortHandle,
             created_id: PortId,
+        }
         let mut port_id_pairs = Vec::new();
         let reservation = sched_ctx.runtime.start_create_pdl_component();
         let mut created_ctx = CompCtx::new(&reservation);
         // Take all the ports ID that are in the `args` (and currently belong to
         // the creator component) and translate them into new IDs that are
         // associated with the component we're about to create
         let mut arg_iter = ValueGroupIter::new(&mut arguments);
         while let Some(port_reference) = arg_iter.next() {
             // Create port entry for new component
             let creator_port_id = port_reference.id;
             let creator_port_handle = creator_ctx.get_port_handle(creator_port_id);
             let creator_port = creator_ctx.get_port(creator_port_handle);
             let created_port_handle = created_ctx.add_port(
                 creator_port.peer_comp_id, creator_port.peer_port_id,
                 creator_port.kind, creator_port.state
             );
             let created_port = created_ctx.get_port(created_port_handle);
             let created_port_id = created_port.self_id;
             port_id_pairs.push(PortPair{
                 creator_handle: creator_port_handle,
                 creator_id: creator_port_id,
                 created_handle: created_port_handle,
                 created_id: created_port_id,
             });
             // Modify value in arguments (bit dirty, but double vec in ValueGroup causes lifetime issues)
             let arg_value = if let Some(heap_pos) = port_reference.heap_pos {
                 &mut arg_iter.group.regions[heap_pos][port_reference.index]
             } else {
                 &mut arg_iter.group.values[port_reference.index]
             };
             match arg_value {
                 Value::Input(id) => *id = port_id_to_eval(created_port_id),
                 Value::Output(id) => *id = port_id_to_eval(created_port_id),
                 _ => unreachable!(),
+            }
+        }
         // For each transferred port pair set their peer components to the
         // correct values. This will only change the values for the ports of
         // the new component.
         let mut created_component_has_remote_peers = false;
         for pair in port_id_pairs.iter() {
             let creator_port_info = creator_ctx.get_port(pair.creator_handle);
             let created_port_info = created_ctx.get_port_mut(pair.created_handle);
             if created_port_info.peer_comp_id == creator_ctx.id {
                 // Port peer is owned by the creator as well
                 let created_peer_port_index = port_id_pairs
                     .iter()
                     .position(|v| v.creator_id == creator_port_info.peer_port_id);
                 match created_peer_port_index {
                     Some(created_peer_port_index) => {
                         // Peer port moved to the new component as well. So
                         // adjust IDs appropriately.
                         let peer_pair = &port_id_pairs[created_peer_port_index];
                         created_port_info.peer_port_id = peer_pair.created_id;
                         created_port_info.peer_comp_id = reservation.id();
                         todo!("either add 'self peer', or remove that idea from Ctx altogether")
                     },
                     None => {
                         // Peer port remains with creator component.
                         created_port_info.peer_comp_id = creator_ctx.id;
                         created_ctx.add_peer(pair.created_handle, sched_ctx, creator_ctx.id, None);
+                    }
+                }
             } else {
                 // Peer is a different component. We'll deal with sending the
                 // appropriate messages later
                 let peer_handle = creator_ctx.get_peer_handle(created_port_info.peer_comp_id);
                 let peer_info = creator_ctx.get_peer(peer_handle);
                 created_ctx.add_peer(pair.created_handle, sched_ctx, peer_info.id, Some(&peer_info.handle));
                 created_component_has_remote_peers = true;
+            }
+        }
         // We'll now actually turn our reservation for a new component into an
         // actual component. Note that we initialize it as "not sleeping" as
         // its initial scheduling might be performed based on `Ack`s in response
         // to message exchanges between remote peers.
         let prompt = Prompt::new(
             &sched_ctx.runtime.protocol.types, &sched_ctx.runtime.protocol.heap,
             definition_id, type_id, arguments,
         );
         let component = CompPDL::new(prompt, port_id_pairs.len());
         let (created_key, component) = sched_ctx.runtime.finish_create_pdl_component(
             reservation, component, created_ctx, false,
         );
         // Now modify the creator's ports: remove every transferred port and
         // potentially remove the peer component.
         for pair in port_id_pairs.iter() {
             // Remove peer if appropriate
             let creator_port_info = creator_ctx.get_port(pair.creator_handle);
             let creator_port_index = creator_ctx.get_port_index(pair.creator_handle);
             let creator_peer_comp_id = creator_port_info.peer_comp_id;
             creator_ctx.remove_peer(sched_ctx, pair.creator_handle, creator_peer_comp_id, false);
             creator_ctx.remove_port(pair.creator_handle);
             // Transfer any messages
             if let Some(mut message) = self.inbox_main.remove(creator_port_index) {
                 message.data_header.target_port = pair.created_id;
                 component.component.adopt_message(&mut component.ctx, message)
+            }
             let mut message_index = 0;
             while message_index < self.inbox_backup.len() {
                 let message = &self.inbox_backup[message_index];
                 if message.data_header.target_port == pair.creator_id {
                     // transfer message
                     let mut message = self.inbox_backup.remove(message_index);
                     message.data_header.target_port = pair.created_id;
                     component.component.adopt_message(&mut component.ctx, message);
                 } else {
                     message_index += 1;
+                }
+            }
             // Handle potential channel between creator and created component
             let created_port_info = component.ctx.get_port(pair.created_handle);
             if created_port_info.peer_comp_id == creator_ctx.id {
                 let peer_port_handle = creator_ctx.get_port_handle(created_port_info.peer_port_id);
                 let peer_port_info = creator_ctx.get_port_mut(peer_port_handle);
                 peer_port_info.peer_comp_id = component.ctx.id;
                 peer_port_info.peer_port_id = created_port_info.self_id;
                 creator_ctx.add_peer(peer_port_handle, sched_ctx, component.ctx.id, None);
+            }
+        }
         // By now all ports and messages have been transferred. If there are any
         // peers that need to be notified about this new component, then we
         // initiate the protocol that will notify everyone here.
         if created_component_has_remote_peers {
             let created_ctx = &component.ctx;
             let schedule_entry_id = self.control.add_schedule_entry(created_ctx.id);
             for pair in port_id_pairs.iter() {
                 let port_info = created_ctx.get_port(pair.created_handle);
                 if port_info.peer_comp_id != creator_ctx.id && port_info.peer_comp_id != created_ctx.id {
                     let message = self.control.add_reroute_entry(
                         creator_ctx.id, port_info.peer_port_id, port_info.peer_comp_id,
                         pair.creator_id, pair.created_id, created_ctx.id,
                         schedule_entry_id
                     );
                     let peer_handle = created_ctx.get_peer_handle(port_info.peer_comp_id);
                     let peer_info = created_ctx.get_peer(peer_handle);
                     peer_info.handle.send_message(sched_ctx, message, true);
+                }
+            }
         } else {
             // Peer can be scheduled immediately
             sched_ctx.runtime.enqueue_work(created_key);
+        }
+    }
+}
 #[inline]
 fn port_id_from_eval(port_id: EvalPortId) -> PortId {
     return PortId(port_id.id);
+}
 #[inline]
 fn port_id_to_eval(port_id: PortId) -> EvalPortId {
     return EvalPortId{ id: port_id.0 };
+}
 /// Recursively goes through the value group, attempting to find ports.
 /// Duplicates will only be added once.
 pub(crate) fn find_ports_in_value_group(value_group: &ValueGroup, ports: &mut Vec<PortId>) {
     // Helper to check a value for a port and recurse if needed.
     fn find_port_in_value(group: &ValueGroup, value: &Value, ports: &mut Vec<PortId>) {
         match value {
             Value::Input(port_id) | Value::Output(port_id) => {
                 // This is an actual port
                 let cur_port = PortId(port_id.id);
                 for prev_port in ports.iter() {
                     if *prev_port == cur_port {
                         // Already added
                         return;
+                    }
+                }
                 ports.push(cur_port);
             },
             Value::Array(heap_pos) |
             Value::Message(heap_pos) |
             Value::String(heap_pos) |
             Value::Struct(heap_pos) |
             Value::Union(_, heap_pos) => {
                 // Reference to some dynamic thing which might contain ports,
                 // so recurse
                 let heap_region = &group.regions[*heap_pos as usize];
                 for embedded_value in heap_region {
                     find_port_in_value(group, embedded_value, ports);
+                }
             },
             _ => {}, // values we don't care about
+        }
+    }
     // Clear the ports, then scan all the available values
     ports.clear();
     for value in &value_group.values {
         find_port_in_value(value_group, value, ports);
+    }
+}
 struct ValueGroupIter<'a> {
     group: &'a mut ValueGroup,
     heap_stack: Vec<(usize, usize)>,
     index: usize,
+}
 impl<'a> ValueGroupIter<'a> {
     fn new(group: &'a mut ValueGroup) -> Self {
         return Self{ group, heap_stack: Vec::new(), index: 0 }
+    }
+}
 struct ValueGroupPortRef {
     id: PortId,
     heap_pos: Option<usize>, // otherwise: on stack
     index: usize,
+}
 impl<'a> Iterator for ValueGroupIter<'a> {
     type Item = ValueGroupPortRef;
     fn next(&mut self) -> Option<Self::Item> {
         // Enter loop that keeps iterating until a port is found
         loop {
             if let Some(pos) = self.heap_stack.last() {
                 let (heap_pos, region_index) = *pos;
                 if region_index >= self.group.regions[heap_pos].len() {
                     self.heap_stack.pop();
                     continue;
+                }
                 let value = &self.group.regions[heap_pos][region_index];
                 self.heap_stack.last_mut().unwrap().1 += 1;
                 match value {
                     Value::Input(id) | Value::Output(id) => {
                         let id = PortId(id.id);
                         return Some(ValueGroupPortRef{
                             id,
                             heap_pos: Some(heap_pos),
                             index: region_index,
                         });
                     },
                     _ => {},
+                }
                 if let Some(heap_pos) = value.get_heap_pos() {

src/runtime2/component/mod.rs

➞

Show inline comments

 mod component_pdl;
 mod component_context;
 mod control_layer;
 mod consensus;
 mod component;
 mod component_ip;
 pub(crate) use component::{Component, CompScheduling};
 pub(crate) use component_pdl::{CompPDL};
 pub(crate) use component_context::CompCtx;
 pub(crate) use control_layer::{ControlId};
 use super::scheduler::*;
 use super::runtime::*;
 /// If the component is sleeping, then that flag will be atomically set to
 /// false. If we're the ones that made that happen then we add it to the work
 /// queue.
 pub(crate) fn wake_up_if_sleeping(sched_ctx: &SchedulerCtx, comp_id: CompId, handle: &CompHandle) {
     use std::sync::atomic::Ordering;
     let should_wake_up = handle.sleeping
         .compare_exchange(true, false, Ordering::AcqRel, Ordering::Acquire)
         .is_ok();
     if should_wake_up {
         let comp_key = unsafe{ comp_id.upgrade() };
         sched_ctx.runtime.enqueue_work(comp_key);
+    }
+}
@@ \ No newline at end of file @@

0 comments (0 inline, 0 general)