CSY/reowolf Changeset - f924af193e2a · Centrum Wiskunde & Informatica (CWI)

Changeset - f924af193e2a

Parent rev.

Child rev.

[Not reviewed]

0 5 0

MH - 3 years ago 2022-05-09 17:10:30
contact@maxhenger.nl

Initial port transmission protocol

5 files changed with 205 insertions and 36 deletions:

src/runtime2/communication.rs

src/runtime2/component/component.rs

171

src/runtime2/component/component_context.rs

src/runtime2/component/control_layer.rs

src/runtime2/component/mod.rs

0 comments (0 inline, 0 general)

src/runtime2/communication.rs

➞

Show inline comments

 use crate::protocol::eval::*;
 use crate::protocol::eval::value::ValueId;
 use super::runtime::*;
 use super::component::*;
 // -----------------------------------------------------------------------------
 // Generic types
 // -----------------------------------------------------------------------------
 #[derive(Debug, Copy, Clone, PartialEq, Eq)]
 pub struct PortId(pub u32);
 impl PortId {
     /// This value is not significant, it is chosen to make debugging easier: a
     /// very large port number is more likely to shine a light on bugs.
     pub fn new_invalid() -> Self {
         return Self(u32::MAX);
+    }
+}
 pub struct Channel {
     pub putter_id: PortId,
     pub getter_id: PortId,
+}
 // -----------------------------------------------------------------------------
 // Data messages
 // -----------------------------------------------------------------------------
 #[derive(Debug)]
 pub struct DataMessage {
     pub data_header: MessageDataHeader,
     pub sync_header: MessageSyncHeader,
     pub content: ValueGroup,
     pub ports: Vec<TransmittedPort>,
+}
 #[derive(Debug)]
 pub enum PortAnnotationKind {
     Getter(PortAnnotationGetter),
     Putter(PortAnnotationPutter),
+}
 #[derive(Debug)]
 pub struct PortAnnotationGetter {
     pub self_comp_id: CompId,
     pub self_port_id: PortId,
     pub peer_comp_id: CompId,
     pub peer_port_id: PortId,
+}
 #[derive(Debug)]
 pub struct PortAnnotationPutter {
     pub self_comp_id: CompId,
     pub self_port_id: PortId,
+}
 #[derive(Debug)]
 pub struct MessageDataHeader {
     pub expected_mapping: Vec<(PortAnnotationKind, Option<u32>)>,
     pub new_mapping: u32,
     pub source_port: PortId,
     pub target_port: PortId,
+}
 #[derive(Debug)]
 pub struct TransmittedPort {
     location: ValueId, // within `content`
     messages: Vec<DataMessage>, // owned by previous component
     peer_comp: CompId,
     peer_port: PortId,
     pub locations: Vec<ValueId>, // within `content`
     pub messages: Vec<DataMessage>, // owned by previous component
     pub peer_comp: CompId,
     pub peer_port: PortId,
     pub kind: PortKind,
     pub state: PortState,
+}
 // -----------------------------------------------------------------------------
 // Sync messages
 // -----------------------------------------------------------------------------
 #[derive(Debug)]
 pub struct SyncMessage {
     pub sync_header: MessageSyncHeader,
     pub content: SyncMessageContent,
+}
 #[derive(Debug)]
 pub enum SyncLocalSolutionEntry {
     Putter(SyncSolutionPutterPort),
     Getter(SyncSolutionGetterPort),
+}
 pub type SyncLocalSolution = Vec<SyncLocalSolutionEntry>;
 /// Getter port in a solution. Upon receiving a message it is certain about who
 /// its peer is.
 #[derive(Debug)]
 pub struct SyncSolutionGetterPort {
     pub self_comp_id: CompId,
     pub self_port_id: PortId,
     pub peer_comp_id: CompId,
     pub peer_port_id: PortId,
     pub mapping: u32,
     pub failed: bool,
+}
 /// Putter port in a solution. A putter may not be certain about who its peer
 /// component/port is.
 #[derive(Debug)]
 pub struct SyncSolutionPutterPort {
     pub self_comp_id: CompId,
     pub self_port_id: PortId,
     pub mapping: u32,
     pub failed: bool,
+}
 #[derive(Debug)]
 pub struct SyncSolutionChannel {
     pub putter: Option<SyncSolutionPutterPort>,
     pub getter: Option<SyncSolutionGetterPort>,
+}
 #[derive(Debug, Copy, Clone, PartialEq, Eq)]
 pub enum SyncRoundDecision {
     None,
     Solution,
     Failure,
+}
 #[derive(Debug)]
 pub struct SyncPartialSolution {
     pub channel_mapping: Vec<SyncSolutionChannel>,
     pub decision: SyncRoundDecision,
+}
 impl Default for SyncPartialSolution {
     fn default() -> Self {
         return Self{
             channel_mapping: Vec::new(),
             decision: SyncRoundDecision::None,
+        }
+    }
+}
 #[derive(Debug)]
 pub enum SyncMessageContent {
     NotificationOfLeader,
     LocalSolution(CompId, SyncLocalSolution), // local solution of the specified component
     PartialSolution(SyncPartialSolution), // partial solution of multiple components
     GlobalSolution,
     GlobalFailure,
+}
 // -----------------------------------------------------------------------------
 // Control messages
 // -----------------------------------------------------------------------------
 #[derive(Debug)]
 pub struct ControlMessage {
     pub(crate) id: ControlId,
     pub sender_comp_id: CompId,
     pub target_port_id: Option<PortId>,
     pub content: ControlMessageContent,
+}
 /// Content of a control message. If the content refers to a port then the
 /// `target_port_id` field is the one that it refers to.
 #[derive(Copy, Clone, Debug)]
 pub enum ControlMessageContent {
     Ack,
     BlockPort,
     UnblockPort,
     ClosePort(ControlMessageClosePort),
     PortPeerChangedBlock,
     PortPeerChangedUnblock(PortId, CompId), // contains (new_port_id, new_component_id)
+}
 #[derive(Copy, Clone, Debug)]
 pub struct ControlMessageClosePort {
     pub closed_in_sync_round: bool, // needed to ensure correct handling of errors
+}
 // -----------------------------------------------------------------------------
 // Messages (generic)
 // -----------------------------------------------------------------------------
 #[derive(Debug)]
 pub struct MessageSyncHeader {
     pub sync_round: u32,
     pub sending_id: CompId,
     pub highest_id: CompId,
+}
 #[derive(Debug)]
 pub enum Message {
     Data(DataMessage),
     Sync(SyncMessage),
     Control(ControlMessage),
     Poll,
+}
 impl Message {
     pub(crate) fn target_port(&self) -> Option<PortId> {
         match self {
             Message::Data(v) =>
                 return Some(v.data_header.target_port),
             Message::Control(v) =>
                 return v.target_port_id,
             Message::Sync(_) =>
                 return None,
             Message::Poll =>
                 return None,
+        }
+    }
     pub(crate) fn modify_target_port(&mut self, port_id: PortId) {
         match self {
             Message::Data(v) =>
                 v.data_header.target_port = port_id,
             Message::Control(v) =>
                 v.target_port_id = Some(port_id),
             Message::Sync(_) => unreachable!(), // should never be called for this message type
             Message::Poll => unreachable!(),
+        }
+    }
+}

src/runtime2/component/component.rs

➞

Show inline comments

 use std::fmt::{Display as FmtDisplay, Result as FmtResult, Formatter};
 use crate::protocol::eval::{Prompt, EvalError, ValueGroup, Value, ValueId, PortId as EvalPortId};
 use crate::protocol::*;
 use crate::runtime2::*;
 use crate::runtime2::communication::*;
 use crate::runtime2::component::component_pdl::find_ports_in_value_group;
 use super::{CompCtx, CompPDL, CompId};
 use super::component_context::*;
 use super::component_random::*;
 use super::component_internet::*;
 use super::control_layer::*;
 use super::consensus::*;
 pub enum CompScheduling {
     Immediate,
     Requeue,
     Sleep,
     Exit,
+}
 /// Potential error emitted by a component
 pub enum CompError {
     /// Error originating from the code executor. Hence has an associated
     /// source location.
     Executor(EvalError),
     /// Error originating from a component, but not necessarily associated with
     /// a location in the source.
     Component(String), // TODO: Maybe a different embedded value in the future?
     /// Pure runtime error. Not necessarily originating from the component
     /// itself. Should be treated as a very severe runtime-compromising error.
     Runtime(RtError),
+}
 impl FmtDisplay for CompError {
     fn fmt(&self, f: &mut Formatter<'_>) -> FmtResult {
         match self {
             CompError::Executor(v) => v.fmt(f),
             CompError::Component(v) => v.fmt(f),
             CompError::Runtime(v) => v.fmt(f),
+        }
+    }
+}
 /// Generic representation of a component (as viewed by a scheduler).
 pub(crate) trait Component {
     /// Called upon the creation of the component. Note that the scheduler
     /// context is officially running another component (the component that is
     /// creating the new component).
     fn on_creation(&mut self, comp_id: CompId, sched_ctx: &SchedulerCtx);
     /// Called when a component crashes or wishes to exit. So is not called
     /// right before destruction, other components may still hold a handle to
     /// the component and send it messages!
     fn on_shutdown(&mut self, sched_ctx: &SchedulerCtx);
     /// Called if the component is created by another component and the messages
     /// are being transferred between the two.
     fn adopt_message(&mut self, comp_ctx: &mut CompCtx, message: DataMessage);
     /// Called if the component receives a new message. The component is
     /// responsible for deciding where that messages goes.
     fn handle_message(&mut self, sched_ctx: &mut SchedulerCtx, comp_ctx: &mut CompCtx, message: Message);
     /// Called if the component's routine should be executed. The return value
     /// can be used to indicate when the routine should be run again.
     fn run(&mut self, sched_ctx: &mut SchedulerCtx, comp_ctx: &mut CompCtx) -> CompScheduling;
+}
 /// Representation of the generic operating mode of a component. Although not
 /// every state may be used by every kind of (builtin) component, this allows
 /// writing standard handlers for particular events in a component's lifetime.
 #[derive(Debug, Copy, Clone, PartialEq, Eq)]
 pub(crate) enum CompMode {
     NonSync, // not in sync mode
     Sync, // in sync mode, can interact with other components
     SyncEnd, // awaiting a solution, i.e. encountered the end of the sync block
     BlockedGet, // blocked because we need to receive a message on a particular port
     BlockedPut, // component is blocked because the port is blocked
     BlockedSelect, // waiting on message to complete the select statement
     BlockedPutPorts,// blocked because we're waiting to send a data message containing ports
     StartExit, // temporary state: if encountered then we start the shutdown process.
     BusyExit, // temporary state: waiting for Acks for all the closed ports, potentially waiting for sync round to finish
     Exit, // exiting: shutdown process started, now waiting until the reference count drops to 0
+}
 impl CompMode {
     pub(crate) fn is_in_sync_block(&self) -> bool {
         use CompMode::*;
         match self {
             Sync | SyncEnd | BlockedGet | BlockedPut | BlockedSelect | BlockedPutPorts => true,
             NonSync | StartExit | BusyExit | Exit => false,
+        }
+    }
     pub(crate) fn is_busy_exiting(&self) -> bool {
         use CompMode::*;
         match self {
             NonSync | Sync | SyncEnd | BlockedGet | BlockedPut | BlockedSelect | BlockedPutPorts => false,
             StartExit | BusyExit => true,
             Exit => false,
+        }
+    }
+}
 #[derive(Debug)]
 pub(crate) enum ExitReason {
     Termination, // regular termination of component
     ErrorInSync,
     ErrorNonSync,
+}
 impl ExitReason {
     pub(crate) fn is_in_sync(&self) -> bool {
         use ExitReason::*;
         match self {
             Termination | ErrorNonSync => false,
             ErrorInSync => true,
+        }
+    }
     pub(crate) fn is_error(&self) -> bool {
         use ExitReason::*;
         match self {
             Termination => false,
             ErrorInSync | ErrorNonSync => true,
+        }
+    }
+}
 /// Component execution state: the execution mode along with some descriptive
 /// fields. Fields are public for ergonomic reasons, use member functions when
 /// appropriate.
 pub(crate) struct CompExecState {
     pub mode: CompMode,
     pub mode_port: PortId, // valid if blocked on a port (put/get)
     pub mode_value: ValueGroup, // valid if blocked on a put
     pub exit_reason: ExitReason, // valid if in StartExit/BusyExit/Exit mode
+}
 impl CompExecState {
     pub(crate) fn new() -> Self {
         return Self{
             mode: CompMode::NonSync,
             mode_port: PortId::new_invalid(),
             mode_value: ValueGroup::default(),
             exit_reason: ExitReason::Termination,
+        }
+    }
     pub(crate) fn set_as_start_exit(&mut self, reason: ExitReason) {
         self.mode = CompMode::StartExit;
         self.exit_reason = reason;
+    }
     pub(crate) fn set_as_blocked_get(&mut self, port: PortId) {
         self.mode = CompMode::BlockedGet;
         self.mode_port = port;
         debug_assert!(self.mode_value.values.is_empty());
+    }
     pub(crate) fn is_blocked_on_get(&self, port: PortId) -> bool {
         return
             self.mode == CompMode::BlockedGet &&
             self.mode_port == port;
+    }
     pub(crate) fn set_as_blocked_put(&mut self, port: PortId, value: ValueGroup) {
         self.mode = CompMode::BlockedPut;
         self.mode_port = port;
         self.mode_value = value;
+    }
     pub(crate) fn is_blocked_on_put(&self, port: PortId) -> bool {
         return
             self.mode == CompMode::BlockedPut &&
             self.mode_port == port;
+    }
+}
 // TODO: Replace when implementing port sending. Should probably be incorporated
 //  into CompCtx (and rename CompCtx into CompComms)
 pub(crate) type InboxMain = Vec<Option<DataMessage>>;
 pub(crate) type InboxMainRef = [Option<DataMessage>];
 pub(crate) type InboxBackup = Vec<DataMessage>;
 /// Creates a new component based on its definition. Meaning that if it is a
 /// user-defined component then we set up the PDL code state. Otherwise we
 /// construct a custom component. This does NOT take care of port and message
 /// management.
 pub(crate) fn create_component(
     protocol: &ProtocolDescription,
     definition_id: ProcedureDefinitionId, type_id: TypeId,
     arguments: ValueGroup, num_ports: usize
 ) -> Box<dyn Component> {
     let definition = &protocol.heap[definition_id];
     debug_assert!(definition.kind == ProcedureKind::Primitive || definition.kind == ProcedureKind::Composite);
     if definition.source.is_builtin() {
         // Builtin component
         let component: Box<dyn Component> = match definition.source {
             ProcedureSource::CompRandomU32 => Box::new(ComponentRandomU32::new(arguments)),
             ProcedureSource::CompTcpClient => Box::new(ComponentTcpClient::new(arguments)),
             _ => unreachable!(),
         };
         return component;
     } else {
         // User-defined component
         let prompt = Prompt::new(
             &protocol.types, &protocol.heap,
             definition_id, type_id, arguments
         );
         let component = CompPDL::new(prompt, num_ports);
         return Box::new(component);
+    }
+}
 // -----------------------------------------------------------------------------
 // Generic component messaging utilities (for sending and receiving)
 // -----------------------------------------------------------------------------
 /// Default handling of sending a data message. In case the port is blocked then
 /// the `ExecState` will become blocked as well. Note that
 /// `default_handle_control_message` will ensure that the port becomes
 /// unblocked if so instructed by the receiving component. The returned
 /// scheduling value must be used.
 #[must_use]
 pub(crate) fn default_send_data_message(
     exec_state: &mut CompExecState, transmitting_port_id: PortId,
     port_instruction: PortInstruction, value: ValueGroup,
     sched_ctx: &SchedulerCtx, consensus: &mut Consensus, comp_ctx: &mut CompCtx
 ) -> Result<CompScheduling, (PortInstruction, String)> {
     debug_assert_eq!(exec_state.mode, CompMode::Sync);
     let port_handle = comp_ctx.get_port_handle(transmitting_port_id);
     let port_info = comp_ctx.get_port_mut(port_handle);
     port_info.last_instruction = port_instruction;
     let port_info = comp_ctx.get_port(port_handle);
     debug_assert_eq!(port_info.kind, PortKind::Putter);
     if port_info.state.is_closed() {
         // Note: normally peer is eventually consistent, but if it has shut down
         // then we can be sure it is consistent (I think?)
         return Err((
             port_info.last_instruction,
             format!("Cannot send on this port, as the peer (id:{}) has shut down", port_info.peer_comp_id.0)
         ))
     } else if port_info.state.is_blocked() {
         // Port is blocked, so we cannot send
         exec_state.set_as_blocked_put(transmitting_port_id, value);
         return Ok(CompScheduling::Sleep);
     } else {
         // Check if there are any ports that are being transmitted
         let mut ports = Vec::new();
         find_ports_in_value_group(&value, &mut ports);
         if !ports.is_empty() {
             for (value_location, port_id) in ports {
                 let transmitted_port_handle = comp_ctx.get_port_handle(port_id);
                 let transmitted_port = comp_ctx.get_port(transmitted_port_handle);
                 if transmitted_port.state.is_set(PortStateFlag::Transmitted) {
                     // Note: We could also attach where the port has been
                     //  transferred
                     return Err((
                         port_info.last_instruction,
                         String::from("Cannot send this message, as it contains a previously transmitted port")
                     ));
+                }
                 // Prepare ack for PPC
                 // Prepare PPC message
+            }
+        }
         // Port is not blocked, so send to the peer
         let peer_handle = comp_ctx.get_peer_handle(port_info.peer_comp_id);
         let peer_info = comp_ctx.get_peer(peer_handle);
         let annotated_message = consensus.annotate_data_message(comp_ctx, port_info, value);
         peer_info.handle.send_message_logged(sched_ctx, Message::Data(annotated_message), true);
         return Ok(CompScheduling::Immediate);
+    }
+}
 pub(crate) enum IncomingData {
     PlacedInSlot,
     SlotFull(DataMessage),
+}
 /// Default handling of receiving a data message. In case there is no room for
 /// the message it is returned from this function. Note that this function is
 /// different from PDL code performing a `get` on a port; this is the case where
 /// the message first arrives at the component.
 // NOTE: This is supposed to be a somewhat temporary implementation. It would be
 //  nicest if the sending component can figure out it cannot send any more data.
 #[must_use]
 pub(crate) fn default_handle_incoming_data_message(
     exec_state: &mut CompExecState, inbox_main: &mut InboxMain,
     comp_ctx: &mut CompCtx, incoming_message: DataMessage,
     sched_ctx: &SchedulerCtx, control: &mut ControlLayer
 ) -> IncomingData {
     let port_handle = comp_ctx.get_port_handle(incoming_message.data_header.target_port);
     let port_index = comp_ctx.get_port_index(port_handle);
     comp_ctx.get_port_mut(port_handle).received_message_for_sync = true;
     let port_value_slot = &mut inbox_main[port_index];
     let target_port_id = incoming_message.data_header.target_port;
     if port_value_slot.is_none() {
         // We can put the value in the slot
         *port_value_slot = Some(incoming_message);
         // Check if we're blocked on receiving this message.
         dbg_code!({
             // Our port cannot have been blocked itself, because we're able to
             // directly insert the message into its slot.
             assert!(!comp_ctx.get_port(port_handle).state.is_blocked());
         });
         if exec_state.is_blocked_on_get(target_port_id) {
             // Return to normal operation
             exec_state.mode = CompMode::Sync;
             exec_state.mode_port = PortId::new_invalid();
             debug_assert!(exec_state.mode_value.values.is_empty());
+        }
         return IncomingData::PlacedInSlot
     } else {
         // Slot is already full, so if the port was previously opened, it will
         // now become closed
         let port_info = comp_ctx.get_port_mut(port_handle);
         if port_info.state.is_open() {
             port_info.state.set(PortStateFlag::BlockedDueToFullBuffers);
             let (peer_handle, message) =
                 control.initiate_port_blocking(comp_ctx, port_handle);
             let peer = comp_ctx.get_peer(peer_handle);
             peer.handle.send_message_logged(sched_ctx, Message::Control(message), true);
+        }
         return IncomingData::SlotFull(incoming_message)
+    }
+}
 pub(crate) enum GetResult {
     Received(DataMessage),
     NoMessage,
     Error((PortInstruction, String)),
+}
 /// Default attempt at trying to receive from a port (i.e. through a `get`, or
 /// the equivalent operation for a builtin component). `target_port` is the port
 /// we're trying to receive from, and the `target_port_instruction` is the
 /// instruction we're attempting on this port.
 pub(crate) fn default_attempt_get(
     exec_state: &mut CompExecState, target_port: PortId, target_port_instruction: PortInstruction,
-    inbox_main: &mut InboxMainRef, inbox_backup: &mut InboxBackup, sched_ctx: &SchedulerCtx,
+    inbox_main: &mut InboxMain, inbox_backup: &mut InboxBackup, sched_ctx: &SchedulerCtx,
     comp_ctx: &mut CompCtx, control: &mut ControlLayer, consensus: &mut Consensus
 ) -> GetResult {
     let port_handle = comp_ctx.get_port_handle(target_port);
     let port_index = comp_ctx.get_port_index(port_handle);
     let port_info = comp_ctx.get_port_mut(port_handle);
     port_info.last_instruction = target_port_instruction;
     if port_info.state.is_closed() {
         let peer_id = port_info.peer_comp_id;
         return GetResult::Error((
             target_port_instruction,
             format!("Cannot get from this port, as the peer component (id:{}) closed the port", peer_id.0)
         ));
+    }
     if let Some(message) = &inbox_main[port_index] {
         if consensus.try_receive_data_message(sched_ctx, comp_ctx, message) {
             // We're allowed to receive this message
             let message = inbox_main[port_index].take().unwrap();
+            let mut message = inbox_main[port_index].take().unwrap();
             debug_assert_eq!(target_port, message.data_header.target_port);
             // Note: we can still run into an unrecoverable error when actually
             // receiving this message
             match default_handle_received_data_message(
                 target_port, target_port_instruction, inbox_main, inbox_backup,
                 target_port, target_port_instruction,
                 &mut message, inbox_main, inbox_backup,
                 comp_ctx, sched_ctx, control,
             ) {
                 Ok(()) => return GetResult::Received(message),
                 Err(location_and_message) => return GetResult::Error(location_and_message)
+            }
         } else {
             // We're not allowed to receive this message. This means that the
             // receiver is attempting to receive something out of order with
             // respect to the sender.
             return GetResult::Error((target_port_instruction, String::from(
                 "Cannot get from this port, as this causes a deadlock. This happens if you `get` in a different order as another component `put`s"
             )));
+        }
     } else {
         // We don't have a message waiting for us and the port is not blocked.
         // So enter the BlockedGet state
         exec_state.set_as_blocked_get(target_port);
         return GetResult::NoMessage;
+    }
+}
 /// Default handling that has been received through a `get`. Will check if any
 /// more messages are waiting, and if the corresponding port was blocked because
 /// of full buffers (hence, will use the control layer to make sure the peer
 /// will become unblocked).
 pub(crate) fn default_handle_received_data_message(
     targeted_port: PortId, port_instruction: PortInstruction,
     inbox_main: &mut InboxMainRef, inbox_backup: &mut InboxBackup,
     targeted_port: PortId, port_instruction: PortInstruction, message: &mut DataMessage,
     inbox_main: &mut InboxMain, inbox_backup: &mut InboxBackup,
     comp_ctx: &mut CompCtx, sched_ctx: &SchedulerCtx, control: &mut ControlLayer
 ) -> Result<(), (PortInstruction, String)> {
     let port_handle = comp_ctx.get_port_handle(targeted_port);
     let port_index = comp_ctx.get_port_index(port_handle);
     let slot = &mut inbox_main[port_index];
     debug_assert!(slot.is_none()); // because we've just received from it
     // If we received any ports, add them to the port tracking and inbox struct.
     // Then notify the peers that they can continue sending to this port, but
     // now at a new address.
     for received_port in &mut message.ports {
         // Transfer messages to main/backup inbox
         let new_inbox_index = inbox_main.len();
         if !received_port.messages.is_empty() {
             inbox_main.push(Some(received_port.messages.remove(0)));
+        }
         inbox_backup.extend(received_port.messages.drain(..));
         // Create a new port locally
         let mut new_port_state = received_port.state;
         new_port_state.set(PortStateFlag::Received);
         let new_port_handle = comp_ctx.add_port(
             received_port.peer_comp, received_port.peer_port,
             received_port.kind, new_port_state
         );
         let new_port = comp_ctx.get_port(new_port_handle);
         comp_ctx.change_port_peer(sched_ctx, new_port_handle, Some(new_port.peer_comp_id));
         // Replace all references to the port in the received message
         for message_location in received_port.locations {
             let value = match message_location {
                 ValueId::Heap(heap_pos, heap_index) => &mut message.content.regions[heap_pos as usize][heap_index as usize],
                 ValueId::Stack(stack_index) => &mut message.content.values[stack_index as usize],
             };
             match value {
                 Value::Input(_) => {
                     debug_assert_eq!(new_port.kind, PortKind::Getter);
                     *value = Value::Input(port_id_to_eval(new_port.self_id));
                 },
                 Value::Output(_) => {
                     debug_assert_eq!(new_port.kind, PortKind::Putter);
                     *value = Value::Output(port_id_to_eval(new_port.self_id));
                 },
                 _ => unreachable!(),
+            }
+        }
         // Let the peer know that the port can now be used
         let peer_handle = comp_ctx.get_peer_handle(new_port.peer_comp_id);
         let peer_info = comp_ctx.get_peer(peer_handle);
         peer_info.handle.send_message_logged(sched_ctx, Message::Control(ControlMessage{
             id: ControlId::new_invalid(),
             sender_comp_id: comp_ctx.id,
             target_port_id: Some(new_port.peer_port_id),
             content: ControlMessageContent::PortPeerChangedUnblock(new_port.id, comp_ctx.id)
         }), true);
+    }
     // Modify last-known location where port instruction was retrieved
     let port_info = comp_ctx.get_port(port_handle);
     debug_assert_ne!(port_info.last_instruction, PortInstruction::None); // set by caller
     debug_assert!(port_info.state.is_open()); // checked by caller
     // Check if there are any more messages in the backup buffer
     for message_index in 0..inbox_backup.len() {
         let message = &inbox_backup[message_index];
         if message.data_header.target_port == targeted_port {
             // One more message, place it in the slot
             let message = inbox_backup.remove(message_index);
             debug_assert!(comp_ctx.get_port(port_handle).state.is_blocked()); // since we're removing another message from the backup
             *slot = Some(message);
             return Ok(());
+        }
+    }
     // Did not have any more messages, so if we were blocked, then we need to
     // unblock the port now (and inform the peer of this unblocking)
     if port_info.state.is_set(PortStateFlag::BlockedDueToFullBuffers) {
         let port_info = comp_ctx.get_port_mut(port_handle);
         port_info.state.clear(PortStateFlag::BlockedDueToFullBuffers);
         let (peer_handle, message) = control.cancel_port_blocking(comp_ctx, port_handle);
         let peer_info = comp_ctx.get_peer(peer_handle);
         peer_info.handle.send_message_logged(sched_ctx, Message::Control(message), true);
+    }
     return Ok(());
+}
 /// Handles control messages in the default way. Note that this function may
 /// take a lot of actions in the name of the caller: pending messages may be
 /// sent, ports may become blocked/unblocked, etc. So the execution
 /// (`CompExecState`), control (`ControlLayer`) and consensus (`Consensus`)
 /// state may all change.
 pub(crate) fn default_handle_control_message(
     exec_state: &mut CompExecState, control: &mut ControlLayer, consensus: &mut Consensus,
     message: ControlMessage, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx
     message: ControlMessage, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx,
     inbox_main: &mut InboxMain, inbox_backup: &mut InboxBackup
 ) -> Result<(), (PortInstruction, String)> {
     match message.content {
         ControlMessageContent::Ack => {
             default_handle_ack(control, message.id, sched_ctx, comp_ctx);
+            default_handle_ack(exec_state, control, message.id, sched_ctx, comp_ctx, inbox_main, inbox_backup);
         },
         ControlMessageContent::BlockPort => {
             // One of our messages was accepted, but the port should be
             // blocked.
             let port_to_block = message.target_port_id.unwrap();
             let port_handle = comp_ctx.get_port_handle(port_to_block);
             let port_info = comp_ctx.get_port_mut(port_handle);
             debug_assert_eq!(port_info.kind, PortKind::Putter);
             port_info.state.set(PortStateFlag::BlockedDueToFullBuffers);
         },
         ControlMessageContent::ClosePort(content) => {
             // Request to close the port. We immediately comply and remove
             // the component handle as well
             let port_to_close = message.target_port_id.unwrap();
             let port_handle = comp_ctx.get_port_handle(port_to_close);
             // We're closing the port, so we will always update the peer of the
             // port (in case of error messages)
             let port_info = comp_ctx.get_port_mut(port_handle);
             port_info.peer_comp_id = message.sender_comp_id;
             port_info.close_at_sync_end = true; // might be redundant (we might set it closed now)
             let peer_comp_id = port_info.peer_comp_id;
             let peer_handle = comp_ctx.get_peer_handle(peer_comp_id);
             // One exception to sending an `Ack` is if we just closed the
             // port ourselves, meaning that the `ClosePort` messages got
             // sent to one another.
             if let Some(control_id) = control.has_close_port_entry(port_handle, comp_ctx) {
                 // The two components (sender and this component) are closing
                 // the channel at the same time. So we don't care about the
                 // content of the `ClosePort` message.
                 default_handle_ack(control, control_id, sched_ctx, comp_ctx);
+                default_handle_ack(exec_state, control, control_id, sched_ctx, comp_ctx, inbox_main, inbox_backup);
             } else {
                 // Respond to the message
                 let port_info = comp_ctx.get_port(port_handle);
                 let last_instruction = port_info.last_instruction;
                 let port_has_had_message = port_info.received_message_for_sync;
                 default_send_ack(message.id, peer_handle, sched_ctx, comp_ctx);
                 comp_ctx.change_port_peer(sched_ctx, port_handle, None);
                 // Handle any possible error conditions (which boil down to: the
                 // port has been used, but the peer has died). If not in sync
                 // mode then we close the port immediately.
                 // Note that `port_was_used` does not mean that any messages
                 // were actually received. It might also mean that e.g. the
                 // component attempted a `get`, but there were no messages, so
                 // now it is in the `BlockedGet` state.
                 let port_was_used = last_instruction != PortInstruction::None;
                 if exec_state.mode.is_in_sync_block() {
                     let closed_during_sync_round = content.closed_in_sync_round && port_was_used;
                     let closed_before_sync_round = !content.closed_in_sync_round && !port_has_had_message;
                     if closed_during_sync_round || closed_before_sync_round {
                         return Err((
                             last_instruction,
                             format!("Peer component (id:{}) shut down, so communication cannot (have) succeed(ed)", peer_comp_id.0)
                         ));
+                    }
                 } else {
                     let port_info = comp_ctx.get_port_mut(port_handle);
                     port_info.state.set(PortStateFlag::Closed);
+                }
+            }
         },
         ControlMessageContent::UnblockPort => {
             // We were previously blocked (or already closed)
             let port_to_unblock = message.target_port_id.unwrap();
             let port_handle = comp_ctx.get_port_handle(port_to_unblock);
             let port_info = comp_ctx.get_port_mut(port_handle);
             debug_assert_eq!(port_info.kind, PortKind::Putter);
             debug_assert!(port_info.state.is_set(PortStateFlag::BlockedDueToFullBuffers));
             port_info.state.clear(PortStateFlag::BlockedDueToFullBuffers);
             default_handle_recently_unblocked_port(exec_state, consensus, port_handle, sched_ctx, comp_ctx);
         },
         ControlMessageContent::PortPeerChangedBlock => {
             // The peer of our port has just changed. So we are asked to
             // temporarily block the port (while our original recipient is
             // potentially rerouting some of the in-flight messages) and
             // Ack. Then we wait for the `unblock` call.
             let port_to_change = message.target_port_id.unwrap();
             let port_handle = comp_ctx.get_port_handle(port_to_change);
             let port_info = comp_ctx.get_port_mut(port_handle);
             let peer_comp_id = port_info.peer_comp_id;
             port_info.state.set(PortStateFlag::BlockedDueToPeerChange);
             let peer_handle = comp_ctx.get_peer_handle(peer_comp_id);
             default_send_ack(message.id, peer_handle, sched_ctx, comp_ctx);
         },
         ControlMessageContent::PortPeerChangedUnblock(new_port_id, new_comp_id) => {
             let port_to_change = message.target_port_id.unwrap();
             let port_handle = comp_ctx.get_port_handle(port_to_change);
             let port_info = comp_ctx.get_port(port_handle);
             debug_assert!(port_info.state.is_set(PortStateFlag::BlockedDueToPeerChange));
             let old_peer_id = port_info.peer_comp_id;
             let port_info = comp_ctx.get_port_mut(port_handle);
             port_info.peer_port_id = new_port_id;
             port_info.state.clear(PortStateFlag::BlockedDueToPeerChange);
             comp_ctx.change_port_peer(sched_ctx, port_handle, Some(new_comp_id));
             default_handle_recently_unblocked_port(exec_state, consensus, port_handle, sched_ctx, comp_ctx);
+        }
+    }
     return Ok(());
+}
 /// Handles a component entering the synchronous block. Will ensure that the
 /// `Consensus` and the `ComponentCtx` are initialized properly.
 pub(crate) fn default_handle_sync_start(
     exec_state: &mut CompExecState, inbox_main: &mut InboxMainRef,
     sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx, consensus: &mut Consensus
 ) {
     sched_ctx.info("Component starting sync mode");
     // If any messages are present for this sync round, set the appropriate flag
     // and notify the consensus handler of the present messages
     consensus.notify_sync_start(comp_ctx);
     for (port_index, message) in inbox_main.iter().enumerate() {
         if let Some(message) = message {
             consensus.handle_incoming_data_message(comp_ctx, message);
             let port_info = comp_ctx.get_port_by_index_mut(port_index);
             port_info.received_message_for_sync = true;
+        }
+    }
     // Modify execution state
     debug_assert_eq!(exec_state.mode, CompMode::NonSync);
     exec_state.mode = CompMode::Sync;
+}
 /// Handles a component that has reached the end of the sync block. This does
 /// not necessarily mean that the component will go into the `NonSync` mode, as
 /// it might have to wait for the leader to finish the round for everyone (see
 /// `default_handle_sync_decision`)
 pub(crate) fn default_handle_sync_end(
     exec_state: &mut CompExecState, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx,
     consensus: &mut Consensus
 ) {
     sched_ctx.info("Component ending sync mode (but possibly waiting for a solution)");
     debug_assert_eq!(exec_state.mode, CompMode::Sync);
     let decision = consensus.notify_sync_end_success(sched_ctx, comp_ctx);
     exec_state.mode = CompMode::SyncEnd;
     default_handle_sync_decision(sched_ctx, exec_state, comp_ctx, decision, consensus);
+}
 /// Handles a component initiating the exiting procedure, and closing all of its
 /// ports. Should only be called once per component (which is ensured by
 /// checking and modifying the mode in the execution state).
 #[must_use]
 pub(crate) fn default_handle_start_exit(
     exec_state: &mut CompExecState, control: &mut ControlLayer,
     sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx, consensus: &mut Consensus
 ) -> CompScheduling {
     debug_assert_eq!(exec_state.mode, CompMode::StartExit);
     sched_ctx.info(&format!("Component starting exit (reason: {:?})", exec_state.exit_reason));
     exec_state.mode = CompMode::BusyExit;
     let exit_inside_sync = exec_state.exit_reason.is_in_sync();
     // If exiting while inside sync mode, report to the leader of the current
     // round that we've failed.
     if exit_inside_sync {
         let decision = consensus.notify_sync_end_failure(sched_ctx, comp_ctx);
         default_handle_sync_decision(sched_ctx, exec_state, comp_ctx, decision, consensus);
+    }
     // Iterating over ports by index to work around borrowing rules
     for port_index in 0..comp_ctx.num_ports() {
         let port = comp_ctx.get_port_by_index_mut(port_index);
         if port.state.is_closed() || port.close_at_sync_end {
             // Already closed, or in the process of being closed
             continue;
+        }
         // Mark as closed
         let port_id = port.self_id;
         port.state.set(PortStateFlag::Closed);
         // Notify peer of closing
         let port_handle = comp_ctx.get_port_handle(port_id);
         let (peer, message) = control.initiate_port_closing(port_handle, exit_inside_sync, comp_ctx);
         let peer_info = comp_ctx.get_peer(peer);
         peer_info.handle.send_message_logged(sched_ctx, Message::Control(message), true);
+    }
     return CompScheduling::Immediate; // to check if we can shut down immediately
+}
 /// Handles a component waiting until all peers are notified that it is quitting
 /// (i.e. after calling `default_handle_start_exit`).
 #[must_use]
 pub(crate) fn default_handle_busy_exit(
     exec_state: &mut CompExecState, control: &ControlLayer,
     sched_ctx: &SchedulerCtx
 ) -> CompScheduling {
     debug_assert_eq!(exec_state.mode, CompMode::BusyExit);
     if control.has_acks_remaining() {
         sched_ctx.info("Component busy exiting, still has `Ack`s remaining");
         return CompScheduling::Sleep;
     } else {
         sched_ctx.info("Component busy exiting, now shutting down");
         exec_state.mode = CompMode::Exit;
         return CompScheduling::Exit;
+    }
+}
 /// Handles a potential synchronous round decision. If there was a decision then
 /// the `Some(success)` value indicates whether the round succeeded or not.
 /// Might also end up changing the `ExecState`.
 ///
 /// Might be called in two cases:
 /// 1. The component is in regular execution mode, at the end of a sync round,
 ///     and is waiting for a solution to the round.
 /// 2. The component has encountered an error during a sync round and is
 ///     exiting, hence is waiting for a "Failure" message from the leader.
 pub(crate) fn default_handle_sync_decision(
     sched_ctx: &SchedulerCtx, exec_state: &mut CompExecState, comp_ctx: &mut CompCtx,
     decision: SyncRoundDecision, consensus: &mut Consensus
 ) -> Option<bool> {
     let success = match decision {
         SyncRoundDecision::None => return None,
         SyncRoundDecision::Solution => true,
         SyncRoundDecision::Failure => false,
     };
     debug_assert!(
         exec_state.mode == CompMode::SyncEnd || (
             exec_state.mode.is_busy_exiting() && exec_state.exit_reason.is_error()
         ) || (
             exec_state.mode.is_in_sync_block() && decision == SyncRoundDecision::Failure
+        )
     );
     sched_ctx.info(&format!("Handling decision {:?} (in mode: {:?})", decision, exec_state.mode));
     consensus.notify_sync_decision(decision);
     if success {
         // We cannot get a success message if the component has encountered an
         // error.
         for port_index in 0..comp_ctx.num_ports() {
             let port_info = comp_ctx.get_port_by_index_mut(port_index);
             if port_info.close_at_sync_end {
                 port_info.state.set(PortStateFlag::Closed);
+            }
+        }
         debug_assert_eq!(exec_state.mode, CompMode::SyncEnd);
         exec_state.mode = CompMode::NonSync;
         return Some(true);
     } else {
         // We may get failure both in all possible cases. But we should only
         // modify the execution state if we're not already in exit mode
         if !exec_state.mode.is_busy_exiting() {
             sched_ctx.error("failed synchronous round, initiating exit");
             exec_state.set_as_start_exit(ExitReason::ErrorNonSync);
+        }
         return Some(false);
+    }
+}
 /// Performs the default action of printing the provided error, and then putting
 /// the component in the state where it will shut down. Only to be used for
 /// builtin components: their error message construction is simpler (and more
 /// common) as they don't have any source code.
 pub(crate) fn default_handle_error_for_builtin(
     exec_state: &mut CompExecState, sched_ctx: &SchedulerCtx,
     location_and_message: (PortInstruction, String)
 ) {
     let (_location, message) = location_and_message;
     sched_ctx.error(&message);
     let exit_reason = if exec_state.mode.is_in_sync_block() {
         ExitReason::ErrorInSync
     } else {
         ExitReason::ErrorNonSync
     };
     exec_state.set_as_start_exit(exit_reason);
+}
 #[inline]
 pub(crate) fn default_handle_exit(_exec_state: &CompExecState) -> CompScheduling {
     debug_assert_eq!(_exec_state.mode, CompMode::Exit);
     return CompScheduling::Exit;
+}
 // -----------------------------------------------------------------------------
 // Internal messaging/state utilities
 // -----------------------------------------------------------------------------
 /// Sends a message without any transmitted ports. Does not check if sending
 /// is actually valid.
 fn send_message_without_ports(
     sending_port_handle: LocalPortHandle, value: ValueGroup,
     comp_ctx: &CompCtx, sched_ctx: &SchedulerCtx, consensus: &mut Consensus,
 ) {
     let port_info = comp_ctx.get_port(sending_port_handle);
     debug_assert!(port_info.state.can_send());
     let peer_handle = comp_ctx.get_peer_handle(port_info.peer_comp_id);
     let peer_info = comp_ctx.get_peer(peer_handle);
     let annotated_message = consensus.annotate_data_message(comp_ctx, port_info, value);
     peer_info.handle.send_message_logged(sched_ctx, Message::Data(annotated_message), true);
+}
 fn send_message_with_ports(
     sending_port_handle: LocalPortHandle, sending_port_instruction: PortInstruction,
     value: ValueGroup,
 /// Prepares sending a message that contains ports. Only once a particular
 /// protocol has completed (where we notify all the peers that the ports will
 /// be transferred) will we actually send the message to the recipient.
 fn prepare_send_message_with_ports(
     sending_port_id: PortId, sending_port_instruction: PortInstruction, value: ValueGroup,
     exec_state: &mut CompExecState, comp_ctx: &mut CompCtx, sched_ctx: &SchedulerCtx,
-    control: &mut ControlLayer, consensus: &mut Consensus
     control: &mut ControlLayer
 ) -> Result<(), (PortInstruction, String)> {
     debug_assert_eq!(exec_state.mode, CompMode::Sync); // busy in sync, trying to send
     let sending_port_handle = comp_ctx.get_port_handle(sending_port_id);
     let sending_port_info = comp_ctx.get_port_mut(sending_port_handle);
     sending_port_info.last_instruction = sending_port_instruction;
     let mut transmit_ports = Vec::new();
     find_ports_in_value_group(&value, &mut transmit_ports);
     debug_assert!(!transmit_ports.is_empty()); // requisite for calling this function
     // Set up the final Ack that triggers us to send our final message
     let unblock_put_control_id = control.add_unblock_put_with_ports_entry();
     for (_, port_id) in &transmit_ports {
         let transmit_port_handle = comp_ctx.get_port_handle(*port_id);
         let transmit_port_info = comp_ctx.get_port_mut(transmit_port_handle);
         let peer_comp_id = transmit_port_info.peer_comp_id;
         let peer_port_id = transmit_port_info.peer_port_id;
         // Note: we checked earlier that we are currently in sync mode. Now we
         // will check if we've already used the port we're about to transmit.
         if !transmit_port_info.last_instruction.is_none() {
             return Err((
                 sending_port_instruction,
                 String::from("Cannot transmit one of the ports, as it is used in this sync round")
+                String::from("Cannot transmit one of the ports in this message, as it is used in this sync round")
             ));
+        }
         if transmit_port_info.state.is_set(PortStateFlag::Transmitted) {
             return Err((
                 sending_port_instruction,
                 String::from("Cannot transmit one of the ports, as that port is already transmitted")
+                String::from("Cannot transmit one of the ports in this message, as that port is already transmitted")
             ));
+        }
         // Set the flag for transmission
         transmit_port_info.state.set(PortStateFlag::Transmitted);
+    }
         // Block the peer of the port
         let message = control.create_port_transfer_message(unblock_put_control_id, comp_ctx.id, peer_port_id);
         let peer_handle = comp_ctx.get_peer_handle(peer_comp_id);
         let peer_info = comp_ctx.get_peer(peer_handle);
     let port_info = comp_ctx.get_port(sending_port_handle);
         peer_info.handle.send_message_logged(sched_ctx, message, true);
+    }
     // We've set up the protocol, once all the PPC's are blocked we are supposed
     // to transfer the message to the recipient. So store it temporarily
     exec_state.mode = CompMode::BlockedPutPorts;
     exec_state.mode_port = sending_port_id;
     exec_state.mode_value = value;
     return Ok(());
+}
 /// Performs the transmission of a data message that contains ports. These were
 /// all stored in the component's execution state by the
 /// `prepare_send_message_with_ports` function.
 fn perform_send_message_with_ports(
     exec_state: &mut CompExecState, sched_ctx: &SchedulerCtx, comp_ctx: &CompCtx, consensus: &mut Consensus,
     inbox_main: &mut InboxMain, inbox_backup: &mut InboxBackup
 ) {
     debug_assert_eq!(exec_state.mode, CompMode::BlockedPutPorts);
     // Find all ports again
     let mut transmit_ports = Vec::new();
     find_ports_in_value_group(&exec_state.mode_value, &mut transmit_ports);
     let port_handle = comp_ctx.get_port_handle(exec_state.mode_port);
     let port_info = comp_ctx.get_port(port_handle);
     let peer_handle = comp_ctx.get_peer_handle(port_info.peer_comp_id);
     // Annotate the data message
     let message_value = exec_state.mode_value.take();
     let mut annotated_message = consensus.annotate_data_message(comp_ctx, port_info, message_value);
     // And further enhance the message by adding data about the ports that are
     // being transferred
     for (port_locations, port_id) in transmit_ports {
         let transmit_port_handle = comp_ctx.get_port_handle(port_id);
         let transmit_port_info = comp_ctx.get_port(transmit_port_handle);
         let transmit_messages = take_port_messages(comp_ctx, transmit_port_id, inbox_main, inbox_backup);
         let mut transmit_port_state = transmit_port_info.state;
         debug_assert!(transmit_port_state.is_set(PortStateFlag::Transmitted));
         transmit_port_state.clear(PortStateFlag::Transmitted);
         annotated_message.ports.push(TransmittedPort{
             locations: port_locations,
             messages: transmit_messages,
             peer_comp: transmit_port_info.peer_comp_id,
             peer_port: transmit_port_info.peer_port_id,
             kind: transmit_port_info.kind,
             state: transmit_port_state
         })
+    }
     // And finally, send the message to the peer
     let peer_info = comp_ctx.get_peer(peer_handle);
     peer_info.handle.send_message_logged(sched_ctx, Message::Data(annotated_message), true);
+}
 /// Handles an `Ack` for the control layer.
 fn default_handle_ack(
     control: &mut ControlLayer, control_id: ControlId,
     sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx
     exec_state: &mut CompExecState, control: &mut ControlLayer, control_id: ControlId,
     sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx, inbox_main: &mut InboxMain,
     inbox_backup: &mut InboxBackup
 ) {
     // Since an `Ack` may cause another one, handle them in a loop
     let mut to_ack = control_id;
     loop {
         let (action, new_to_ack) = control.handle_ack(to_ack, sched_ctx, comp_ctx);
         match action {
             AckAction::SendMessage(target_comp, message) => {
                 // FIX @NoDirectHandle
                 let mut handle = sched_ctx.runtime.get_component_public(target_comp);
                 handle.send_message_logged(sched_ctx, Message::Control(message), true);
                 let _should_remove = handle.decrement_users();
                 debug_assert!(_should_remove.is_none());
             },
             AckAction::ScheduleComponent(to_schedule) => {
                 // FIX @NoDirectHandle
                 let mut handle = sched_ctx.runtime.get_component_public(to_schedule);
                 // Note that the component is intentionally not
                 // sleeping, so we just wake it up
                 debug_assert!(!handle.sleeping.load(std::sync::atomic::Ordering::Acquire));
                 let key = unsafe { to_schedule.upgrade() };
                 sched_ctx.runtime.enqueue_work(key);
                 let _should_remove = handle.decrement_users();
                 debug_assert!(_should_remove.is_none());
             },
             AckAction::UnblockPutWithPorts => {
                 // Send the message (containing ports) to the recipient
                 perform_send_message_with_ports(exec_state, sched_ctx, comp_ctx, consensus, inbox_main, inbox_backup);
                 exec_state.mode = CompMode::Sync;
                 exec_state.mode_port = PortId::new_invalid();
             },
             AckAction::None => {}
+        }
         match new_to_ack {
             Some(new_to_ack) => to_ack = new_to_ack,
             None => break,
+        }
+    }
+}
 /// Little helper for sending the most common kind of `Ack`
 fn default_send_ack(
     causer_of_ack_id: ControlId, peer_handle: LocalPeerHandle,
     sched_ctx: &SchedulerCtx, comp_ctx: &CompCtx
 ) {
     let peer_info = comp_ctx.get_peer(peer_handle);
     peer_info.handle.send_message_logged(sched_ctx, Message::Control(ControlMessage{
         id: causer_of_ack_id,
         sender_comp_id: comp_ctx.id,
         target_port_id: None,
         content: ControlMessageContent::Ack
     }), true);
+}
 /// Handles the unblocking of a putter port. In case there is a pending message
 /// on that port then it will be sent.
 fn default_handle_recently_unblocked_port(
     exec_state: &mut CompExecState, consensus: &mut Consensus,
     port_handle: LocalPortHandle, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx,
 ) {
     let port_info = comp_ctx.get_port_mut(port_handle);
     let port_id = port_info.self_id;
     debug_assert!(!port_info.state.is_blocked()); // should have been done by the caller
     if exec_state.is_blocked_on_put(port_id) {
         // Return to the regular execution mode
         exec_state.mode = CompMode::Sync;
         exec_state.mode_port = PortId::new_invalid();
         // Annotate the message that we're going to send
         let port_info = comp_ctx.get_port(port_handle); // for immutable access
         debug_assert_eq!(port_info.kind, PortKind::Putter);
         let to_send = exec_state.mode_value.take();
         let to_send = consensus.annotate_data_message(comp_ctx, port_info, to_send);
         // Retrieve peer to send the message
         let peer_handle = comp_ctx.get_peer_handle(port_info.peer_comp_id);
         let peer_info = comp_ctx.get_peer(peer_handle);
         peer_info.handle.send_message_logged(sched_ctx, Message::Data(to_send), true);
         exec_state.mode = CompMode::Sync; // because we're blocked on a `put`, we must've started in the sync state.
         exec_state.mode_port = PortId::new_invalid();
+    }
+}
 #[inline]
 pub(crate) fn port_id_from_eval(port_id: EvalPortId) -> PortId {
     return PortId(port_id.id);
+}
 #[inline]
 pub(crate) fn port_id_to_eval(port_id: PortId) -> EvalPortId {
     return EvalPortId{ id: port_id.0 };
+}
 // TODO: Optimize double vec
 type EncounteredPorts = Vec<(Vec<ValueId>, PortId)>;
 /// Recursively goes through the value group, attempting to find ports.
 /// Duplicates will only be added once.
 pub(crate) fn find_ports_in_value_group(value_group: &ValueGroup, ports: &mut EncounteredPorts) {
     // Helper to check a value for a port and recurse if needed.
     fn find_port_in_value(group: &ValueGroup, value: &Value, value_location: ValueId, ports: &mut EncounteredPorts) {
         match value {
             Value::Input(port_id) | Value::Output(port_id) => {
                 // This is an actual port
                 let cur_port = PortId(port_id.id);
                 for prev_port in ports.iter_mut() {
                     if prev_port.1 == cur_port {
                         // Already added
                         prev_port.0.push(value_location);
                         return;
+                    }
+                }
                 ports.push((vec![value_location], cur_port));
             },
             Value::Array(heap_pos) |
             Value::Message(heap_pos) |
             Value::String(heap_pos) |
             Value::Struct(heap_pos) |
             Value::Union(_, heap_pos) => {
                 // Reference to some dynamic thing which might contain ports,
                 // so recurse
                 let heap_region = &group.regions[*heap_pos as usize];
                 for (value_index, embedded_value) in heap_region.iter().enumerate() {
                     let value_location = ValueId::Heap(*heap_pos, value_index as u32);
                     find_port_in_value(group, embedded_value, value_location, ports);
+                }
             },
             _ => {}, // values we don't care about
+        }
+    }
     // Clear the ports, then scan all the available values
     ports.clear();
     for (value_index, value) in &value_group.values.iter().enumerate() {
         find_port_in_value(value_group, value, ValueId::Stack(value_index as u32), ports);
+    }
+}
 /// Goes through the inbox of a component and takes out all the messages that
 /// are targeted at a specific port
 pub(crate) fn take_port_messages(
     comp_ctx: &CompCtx, port_id: PortId,
     inbox_main: &mut InboxMain, inbox_backup: &mut InboxBackup
 ) -> Vec<DataMessage> {
     let mut messages = Vec::new();
     let port_handle = comp_ctx.get_port_handle(port_id);
     let port_index = comp_ctx.get_port_index(port_handle);
     if let Some(message) = inbox_main[port_index].take() {
         messages.push(message);
+    }
     let mut message_index = 0;
     while message_index < inbox_backup.len() {
         let message = &inbox_backup[message_index];
         if message.data_header.target_port == port_id {
             let message = inbox_backup.remove(message_index);
             messages.push(message);
         } else {
             message_index += 1;
+        }
+    }
     return messages;
+}
@@ \ No newline at end of file @@

src/runtime2/component/component_context.rs

➞

Show inline comments

 use std::fmt::{Debug, Formatter, Result as FmtResult};
 use crate::runtime2::scheduler::*;
 use crate::runtime2::runtime::*;
 use crate::runtime2::communication::*;
 use crate::protocol::ExpressionId;
 /// Helper struct to remember when the last operation on the port took place.
 #[derive(Debug, PartialEq, Copy, Clone)]
 pub enum PortInstruction {
     None,
     NoSource,
     SourceLocation(ExpressionId),
 }
 impl PortInstruction {
     pub fn is_none(&self) -> bool {
         match self {
             PortInstruction::None => return true,
             _ => return false,
         }
     }
 }
 /// Directionality of a port
 #[derive(Debug, PartialEq, Eq, Clone, Copy)]
 pub enum PortKind {
     Putter,
     Getter,
 }
 /// Bitflags for port
 // TODO: Incorporate remaining flags from `Port` struct
 #[repr(u32)]
 #[derive(Debug, Copy, Clone)]
 pub enum PortStateFlag {
     Closed = 0x01, // If not closed, then the port is open
     BlockedDueToPeerChange = 0x02, // busy changing peers, hence use of port is temporarily blocked
     BlockedDueToFullBuffers = 0x04,
     Transmitted = 0x08, // Transmitted, so cannot be used anymore
     Received = 0x10, // Received, so cannot be used yet, only after the sync round
 }
 #[derive(Copy, Clone)]
 pub struct PortState {
     flags: u32
 }
 impl PortState {
     pub(crate) fn new() -> PortState {
         return PortState{ flags: 0 }
     }
     // high-level
     #[inline]
     pub fn is_open(&self) -> bool {
         return !self.is_closed();
     }
     #[inline]
     pub fn can_send(&self) -> bool {
         return
             !self.is_set(PortStateFlag::Closed) &&
             !self.is_set(PortStateFlag::Transmitted);
             !self.is_set(PortStateFlag::Transmitted) &&
             !self.is_set(PortStateFlag::Received);
     }
     #[inline]
     pub fn is_closed(&self) -> bool {
         return self.is_set(PortStateFlag::Closed);
     }
     #[inline]
     pub fn is_blocked(&self) -> bool {
         return
             self.is_set(PortStateFlag::BlockedDueToPeerChange) ||
             self.is_set(PortStateFlag::BlockedDueToFullBuffers);
     }
     // lower-level utils
     #[inline]
     pub fn set(&mut self, flag: PortStateFlag) {
         self.flags |= flag as u32;
     }
     #[inline]
     pub fn clear(&mut self, flag: PortStateFlag) {
         self.flags &= !(flag as u32);
     }
     #[inline]
     pub const fn is_set(&self, flag: PortStateFlag) -> bool {
         return (self.flags & (flag as u32)) != 0;
     }
 }
 impl Debug for PortState {
     fn fmt(&self, f: &mut Formatter<'_>) -> FmtResult {
         use PortStateFlag::*;
         let mut s = f.debug_struct("PortState");
         for (flag_name, flag_value) in &[
             ("closed", Closed),
             ("blocked_peer_change", BlockedDueToPeerChange),
             ("blocked_full_buffers", BlockedDueToFullBuffers)
             ("blocked_full_buffers", BlockedDueToFullBuffers),
             ("transmitted", Transmitted),
         ] {
             s.field(flag_name, &self.is_set(*flag_value));
         }
         return s.finish();
     }
 }
 #[derive(Debug)]
 pub struct Port {
     // Identifiers
     pub self_id: PortId,
     pub peer_comp_id: CompId, // eventually consistent
     pub peer_port_id: PortId, // eventually consistent
     // Generic operating state
     pub kind: PortKind,
     pub state: PortState,
     // State tracking for error detection and error handling
     pub last_instruction: PortInstruction, // used during sync round to detect port-closed-during-sync errors
     pub received_message_for_sync: bool, // used during sync round to detect port-closed-before-sync errors
     pub close_at_sync_end: bool, // set during sync round when receiving a port-closed-after-sync message
     pub(crate) associated_with_peer: bool,
 }
 pub struct Peer {
     pub id: CompId,
     pub num_associated_ports: u32,
     pub(crate) handle: CompHandle,
 }
 /// Port and peer management structure. Will keep a local reference counter to
 /// the ports associate with peers, additionally manages the atomic reference
 /// counter associated with the peers' component handles.
 pub struct CompCtx {
     pub id: CompId,
     ports: Vec<Port>,
     peers: Vec<Peer>,
     port_id_counter: u32,
 }
 #[derive(Copy, Clone, PartialEq, Eq)]
 pub struct LocalPortHandle(PortId);
 #[derive(Copy, Clone)]
 pub struct LocalPeerHandle(CompId);
 impl CompCtx {
     /// Creates a new component context based on a reserved entry in the
     /// component store. This reservation is used such that we already know our
     /// assigned ID.
     pub(crate) fn new(reservation: &CompReserved) -> Self {
         return Self{
             id: reservation.id(),
             ports: Vec::new(),
             peers: Vec::new(),
             port_id_counter: 0,
         }
     }
     /// Creates a new channel that is fully owned by the component associated
     /// with this context.
     pub(crate) fn create_channel(&mut self) -> Channel {
         let putter_id = PortId(self.take_port_id());
         let getter_id = PortId(self.take_port_id());
         self.ports.push(Port{
             self_id: putter_id,
             peer_port_id: getter_id,
             kind: PortKind::Putter,
             state: PortState::new(),
             peer_comp_id: self.id,
             last_instruction: PortInstruction::None,
             close_at_sync_end: false,
             received_message_for_sync: false,
             associated_with_peer: false,
         });
         self.ports.push(Port{
             self_id: getter_id,
             peer_port_id: putter_id,
             kind: PortKind::Getter,
             state: PortState::new(),
             peer_comp_id: self.id,
             last_instruction: PortInstruction::None,
             close_at_sync_end: false,
             received_message_for_sync: false,
             associated_with_peer: false,
         });
         return Channel{ putter_id, getter_id };
     }
     /// Adds a new port. Make sure to call `add_peer` afterwards.
     pub(crate) fn add_port(&mut self, peer_comp_id: CompId, peer_port_id: PortId, kind: PortKind, state: PortState) -> LocalPortHandle {
         let self_id = PortId(self.take_port_id());
         self.ports.push(Port{
             self_id, peer_comp_id, peer_port_id, kind, state,
             last_instruction: PortInstruction::None,
             close_at_sync_end: false,
             received_message_for_sync: false,
             associated_with_peer: false,
         });
         return LocalPortHandle(self_id);
     }
     /// Removes a port. Make sure you called `remove_peer` first.
     pub(crate) fn remove_port(&mut self, port_handle: LocalPortHandle) -> Port {
         let port_index = self.must_get_port_index(port_handle);
         let port = self.ports.remove(port_index);
         dbg_code!(assert!(!port.associated_with_peer));
         return port;
     }
     /// Changes a peer
     pub(crate) fn change_port_peer(&mut self, sched_ctx: &SchedulerCtx, port_handle: LocalPortHandle, new_peer_comp_id: Option<CompId>) {
         // If port is currently associated with a peer, then remove that peer
         let port_index = self.get_port_index(port_handle);
         let port = &mut self.ports[port_index];
         let port_is_closed = port.state.is_closed();
         if port.associated_with_peer {
             // Remove old peer association
             port.associated_with_peer = false;
             let peer_comp_id = port.peer_comp_id;
             let peer_index = self.get_peer_index_by_id(peer_comp_id).unwrap();
             let peer = &mut self.peers[peer_index];
             peer.num_associated_ports -= 1;
             if peer.num_associated_ports == 0 {
                 let mut peer = self.peers.remove(peer_index);
                 if let Some(key) = peer.handle.decrement_users() {
                     sched_ctx.runtime.destroy_component(key);
                 }
             }
         }
         // If there is a new peer, then set it as the peer associated with the
         // port
         if let Some(peer_id) = new_peer_comp_id {
             let port = &mut self.ports[port_index];
             port.peer_comp_id = peer_id;
             if peer_id != self.id && !port_is_closed {
                 port.associated_with_peer = true;
                 match self.get_peer_index_by_id(peer_id) {
                     Some(index) => {
                         let peer = &mut self.peers[index];
                         peer.num_associated_ports += 1;
                     },
                     None => {
                         let handle = sched_ctx.runtime.get_component_public(peer_id);
                         self.peers.push(Peer {
                             id: peer_id,
                             num_associated_ports: 1,
                             handle
                         })
                     }
                 }
             }
         }
     }
     pub(crate) fn get_port_handle(&self, port_id: PortId) -> LocalPortHandle {
         return LocalPortHandle(port_id);
     }
     // should perhaps be revised, used in main inbox
     pub(crate) fn get_port_index(&self, port_handle: LocalPortHandle) -> usize {
         return self.must_get_port_index(port_handle);
     }
     pub(crate) fn get_peer_handle(&self, peer_id: CompId) -> LocalPeerHandle {
         return LocalPeerHandle(peer_id);
     }
     pub(crate) fn get_port(&self, port_handle: LocalPortHandle) -> &Port {
         let index = self.must_get_port_index(port_handle);
         return &self.ports[index];
     }
     pub(crate) fn get_port_mut(&mut self, port_handle: LocalPortHandle) -> &mut Port {
         let index = self.must_get_port_index(port_handle);
         return &mut self.ports[index];
     }
     pub(crate) fn get_port_by_index_mut(&mut self, index: usize) -> &mut Port {
         return &mut self.ports[index];
     }
     pub(crate) fn get_peer(&self, peer_handle: LocalPeerHandle) -> &Peer {
         let index = self.must_get_peer_index(peer_handle);
         return &self.peers[index];
     }
     pub(crate) fn get_peer_mut(&mut self, peer_handle: LocalPeerHandle) -> &mut Peer {
         let index = self.must_get_peer_index(peer_handle);
         return &mut self.peers[index];
     }
     #[inline]
     pub(crate) fn iter_ports(&self) -> impl Iterator<Item=&Port> {
         return self.ports.iter();
     }
     #[inline]
     pub(crate) fn iter_ports_mut(&mut self) -> impl Iterator<Item=&mut Port> {
         return self.ports.iter_mut();
     }
     #[inline]
     pub(crate) fn iter_peers(&self) -> impl Iterator<Item=&Peer> {
         return self.peers.iter();
     }
     #[inline]
     pub(crate) fn num_ports(&self) -> usize {
         return self.ports.len();
     }
     // -------------------------------------------------------------------------
     // Local utilities
     // -------------------------------------------------------------------------
     fn must_get_port_index(&self, handle: LocalPortHandle) -> usize {
         for (index, port) in self.ports.iter().enumerate() {
             if port.self_id == handle.0 {
                 return index;
             }
         }
         unreachable!()
     }
     fn must_get_peer_index(&self, handle: LocalPeerHandle) -> usize {
         for (index, peer) in self.peers.iter().enumerate() {
             if peer.id == handle.0 {
                 return index;
             }
         }
         unreachable!()
     }
     fn get_peer_index_by_id(&self, comp_id: CompId) -> Option<usize> {
         for (index, peer) in self.peers.iter().enumerate() {
             if peer.id == comp_id {
                 return Some(index);
             }
         }
         return None;
     }
     fn take_port_id(&mut self) -> u32 {
         let port_id = self.port_id_counter;
         self.port_id_counter = self.port_id_counter.wrapping_add(1);
         return port_id;
     }
 }
@@ \ No newline at end of file @@

src/runtime2/component/control_layer.rs

➞

Show inline comments

 use crate::runtime2::runtime::*;
 use crate::runtime2::communication::*;
 use crate::runtime2::component::*;
 use super::component_context::*;
 #[derive(Debug, PartialEq, Eq, Clone, Copy)]
 pub(crate) struct ControlId(u32);
 impl ControlId {
     /// Like other invalid IDs, this one doesn't care any significance, but is
     /// just set at u32::MAX to hopefully bring out bugs sooner.
     fn new_invalid() -> Self {
+    pub(crate) fn new_invalid() -> Self {
         return ControlId(u32::MAX);
+    }
+}
 struct ControlEntry {
     id: ControlId,
     ack_countdown: u32,
     content: ControlContent,
+}
 enum ControlContent {
     PeerChange(ContentPeerChange),
     ScheduleComponent(CompId),
     ClosedPort(PortId),
     UnblockPutWithPorts
+}
 struct ContentPeerChange {
     source_port: PortId,
     source_comp: CompId,
     old_target_port: PortId,
     new_target_port: PortId,
     new_target_comp: CompId,
     schedule_entry_id: ControlId,
+}
 struct ControlClosedPort {
     closed_port: PortId,
     exit_entry_id: Option<ControlId>,
+}
 pub(crate) enum AckAction {
     None,
     SendMessage(CompId, ControlMessage),
     ScheduleComponent(CompId),
     UnblockPutWithPorts,
+}
 /// Handling/sending control messages.
 pub(crate) struct ControlLayer {
     id_counter: ControlId,
     entries: Vec<ControlEntry>,
+}
 impl ControlLayer {
     pub(crate) fn should_reroute(&self, message: &mut Message) -> Option<CompId> {
         // Safety note: rerouting should occur during the time when we're
         // notifying a peer of a new component. During this period that
         // component hasn't been executed yet, so cannot have died yet.
         // FIX @NoDirectHandle
         let target_port = message.target_port();
         if target_port.is_none() {
             return None;
+        }
         let target_port = target_port.unwrap();
         for entry in &self.entries {
             if let ControlContent::PeerChange(entry) = &entry.content {
                 if entry.old_target_port == target_port {
                     message.modify_target_port(entry.new_target_port);
                     return Some(entry.new_target_comp);
+                }
+            }
+        }
         return None;
+    }
     /// Handles an acknowledgement. The returned action must be performed by the
     /// caller. The optionally returned `ControlId` must be used and passed to
     /// `handle_ack` again.
     pub(crate) fn handle_ack(&mut self, entry_id: ControlId, sched_ctx: &SchedulerCtx, comp_ctx: &mut CompCtx) -> (AckAction, Option<ControlId>) {
         let entry_index = self.get_entry_index_by_id(entry_id).unwrap();
         let entry = &mut self.entries[entry_index];
         debug_assert!(entry.ack_countdown > 0);
         entry.ack_countdown -= 1;
         if entry.ack_countdown != 0 {
             return (AckAction::None, None);
+        }
         let entry = self.entries.remove(entry_index);
         // All `Ack`s received, take action based on the kind of entry
         match entry.content {
             ControlContent::PeerChange(content) => {
                 // If change of peer is ack'd. Then we are certain we have
                 // rerouted all of the messages, and the sender's port can now
                 // be unblocked again.
                 let target_comp_id = content.source_comp;
                 let message_to_send = ControlMessage{
                     id: ControlId::new_invalid(),
                     sender_comp_id: comp_ctx.id,
                     target_port_id: Some(content.source_port),
                     content: ControlMessageContent::PortPeerChangedUnblock(
                         content.new_target_port,
                         content.new_target_comp
+                    )
                 };
                 let to_ack = content.schedule_entry_id;
                 return (
                     AckAction::SendMessage(target_comp_id, message_to_send),
                     Some(to_ack)
                 );
             },
             ControlContent::ScheduleComponent(to_schedule) => {
                 // If all change-of-peers are `Ack`d, then we're ready to
                 // schedule the component!
                 return (AckAction::ScheduleComponent(to_schedule), None);
             },
             ControlContent::ClosedPort(closed_port) => {
                 // If a closed port is Ack'd, then we remove the reference to
                 // that component.
                 let port_handle = comp_ctx.get_port_handle(closed_port);
                 debug_assert!(comp_ctx.get_port(port_handle).state.is_closed());
                 comp_ctx.change_port_peer(sched_ctx, port_handle, None);
                 return (AckAction::None, None);
             },
             ControlContent::UnblockPutWithPorts => {
                 return (AckAction::UnblockPutWithPorts, None);
+            }
+        }
+    }
     pub(crate) fn has_acks_remaining(&self) -> bool {
         return !self.entries.is_empty();
+    }
     // -------------------------------------------------------------------------
-    // Port transfer (due to component creation)
     // Port transfer
     // -------------------------------------------------------------------------
     /// Adds an entry that, when completely ack'd, will schedule a component.
     pub(crate) fn add_schedule_entry(&mut self, to_schedule_id: CompId) -> ControlId {
         let entry_id = self.take_id();
         self.entries.push(ControlEntry{
             id: entry_id,
             ack_countdown: 0, // incremented by calls to `add_reroute_entry`
             content: ControlContent::ScheduleComponent(to_schedule_id),
         });
         return entry_id;
+    }
     /// Adds an entry that returns the similarly named Ack action
     pub(crate) fn add_unblock_put_with_ports_entry(&mut self) -> ControlId {
         let entry_id = self.take_id();
         self.entries.push(ControlEntry{
             id: entry_id,
             ack_countdown: 1, // incremented by calls to `add_reroute_entry`
             content: ControlContent::UnblockPutWithPorts,
         });
         return entry_id;
+    }
     /// Removes a schedule entry. Only used if the caller preemptively called
     /// `add_schedule_entry`, but ended up not calling `add_reroute_entry`,
     /// hence the `ack_countdown` in the scheduling entry is at 0.
     pub(crate) fn remove_schedule_entry(&mut self, schedule_entry_id: ControlId) {
         let index = self.get_entry_index_by_id(schedule_entry_id).unwrap();
         debug_assert_eq!(self.entries[index].ack_countdown, 0);
         self.entries.remove(index);
+    }
     /// Adds a rerouting entry (used to ensure all messages will end up at a
     /// newly created component). Used when creating a new component.
     pub(crate) fn add_reroute_entry(
         &mut self, creator_comp_id: CompId,
         source_port_id: PortId, source_comp_id: CompId,
         old_target_port_id: PortId, new_target_port_id: PortId, new_comp_id: CompId,
         schedule_entry_id: ControlId,
     ) -> Message {
         let entry_id = self.take_id();
         self.entries.push(ControlEntry{
             id: entry_id,
             ack_countdown: 1,
             content: ControlContent::PeerChange(ContentPeerChange{
                 source_port: source_port_id,
                 source_comp: source_comp_id,
                 old_target_port: old_target_port_id,
                 new_target_port: new_target_port_id,
                 new_target_comp: new_comp_id,
                 schedule_entry_id,
             }),
         });
         // increment counter on schedule entry
         let entry_index = self.get_entry_index_by_id(schedule_entry_id).unwrap();
         self.entries[entry_index].ack_countdown += 1;
         return Message::Control(ControlMessage{
             id: entry_id,
             sender_comp_id: creator_comp_id,
             target_port_id: Some(source_port_id),
             content: ControlMessageContent::PortPeerChangedBlock
         })
+    }
     /// Creates a PortPeerChanged message (and increments ack-counter on a
     /// pre-created control entry) that is used as a preliminary step before
     /// transferring a port over a channel.
     pub(crate) fn create_port_transfer_message(
         &mut self, associated_control_id: ControlId,
         sender_comp_id: CompId, target_port_id: PortId
     ) -> Message {
         let entry_index = self.get_entry_index_by_id(associated_control_id).unwrap();
         self.entries[entry_index].ack_countdown += 1;
         return Message::Control(ControlMessage{
             id: associated_control_id,
             sender_comp_id,
             target_port_id: Some(target_port_id),
             content: ControlMessageContent::PortPeerChangedBlock
         })
+    }
     // -------------------------------------------------------------------------
     // Blocking, unblocking, and closing ports
     // -------------------------------------------------------------------------
     pub(crate) fn has_close_port_entry(&self, port_handle: LocalPortHandle, comp_ctx: &CompCtx) -> Option<ControlId> {
         let port = comp_ctx.get_port(port_handle);
         let port_id = port.self_id;
         for entry in self.entries.iter() {
             if let ControlContent::ClosedPort(entry_port_id) = &entry.content {
                 if *entry_port_id == port_id {
                     return Some(entry.id);
+                }
+            }
+        }
         return None;
+    }
     /// Initiates the control message procedures for closing a port. Caller must
     /// make sure that the port state has already been set to `Closed`.
     pub(crate) fn initiate_port_closing(&mut self, port_handle: LocalPortHandle, exit_inside_sync: bool, comp_ctx: &CompCtx) -> (LocalPeerHandle, ControlMessage) {
         let port = comp_ctx.get_port(port_handle);
         let peer_port_id = port.peer_port_id;
         debug_assert!(port.state.is_closed());
         // Construct the port-closing entry
         let entry_id = self.take_id();
         self.entries.push(ControlEntry{
             id: entry_id,
             ack_countdown: 1,
             content: ControlContent::ClosedPort(port.self_id),
         });
         // Return the messages notifying peer of the closed port
         let peer_handle = comp_ctx.get_peer_handle(port.peer_comp_id);
         return (
             peer_handle,
             ControlMessage{
                 id: entry_id,
                 sender_comp_id: comp_ctx.id,
                 target_port_id: Some(peer_port_id),
                 content: ControlMessageContent::ClosePort(ControlMessageClosePort{
                     closed_in_sync_round: exit_inside_sync,
                 }),
+            }
         );
+    }
     /// Generates the control message used to indicate to a peer that a port
     /// should be blocked (expects the caller to have set the port's state to
     /// blocked).
     pub(crate) fn initiate_port_blocking(&mut self, comp_ctx: &CompCtx, port_handle: LocalPortHandle) -> (LocalPeerHandle, ControlMessage) {
         let port_info = comp_ctx.get_port(port_handle);
         debug_assert_eq!(port_info.kind, PortKind::Getter); // because we're telling the putter to block
         debug_assert!(port_info.state.is_set(PortStateFlag::BlockedDueToFullBuffers)); // contract with caller
         let peer_port_id = port_info.peer_port_id;
         let peer_comp_id = port_info.peer_comp_id;
         let peer_handle = comp_ctx.get_peer_handle(peer_comp_id);
         return (
             peer_handle,
             ControlMessage{
                 id: ControlId::new_invalid(),
                 sender_comp_id: comp_ctx.id,
                 target_port_id: Some(peer_port_id),
                 content: ControlMessageContent::BlockPort,
+            }
         );
+    }
     /// Generates a messages used to indicate to a peer that a port should be
     /// unblocked again.
     pub(crate) fn cancel_port_blocking(&mut self, comp_ctx: &CompCtx, port_handle: LocalPortHandle) -> (LocalPeerHandle, ControlMessage) {
         let port_info = comp_ctx.get_port(port_handle);
         debug_assert_eq!(port_info.kind, PortKind::Getter); // because we're initiating the unblocking
         let peer_handle = comp_ctx.get_peer_handle(port_info.peer_comp_id);
         return (
             peer_handle,
             ControlMessage{
                 id: ControlId::new_invalid(),
                 sender_comp_id: comp_ctx.id,
                 target_port_id: Some(port_info.peer_port_id),
                 content: ControlMessageContent::UnblockPort,
+            }
         );
+    }
     // -------------------------------------------------------------------------
     // Internal utilities
     // -------------------------------------------------------------------------
     fn take_id(&mut self) -> ControlId {
         let id = self.id_counter;
         self.id_counter.0 = self.id_counter.0.wrapping_add(1);
         return id;
+    }
     fn get_entry_index_by_id(&self, entry_id: ControlId) -> Option<usize> {
         for (index, entry) in self.entries.iter().enumerate() {
             if entry.id == entry_id {
                 return Some(index);
+            }
+        }
         return None;
+    }
+}
 impl Default for ControlLayer {
     fn default() -> Self {
         return ControlLayer{
             id_counter: ControlId(0),
             entries: Vec::new(),
+        }
+    }
+}
@@ \ No newline at end of file @@

src/runtime2/component/mod.rs

➞

Show inline comments

 mod component_pdl;
 mod component_context;
 mod control_layer;
 mod consensus;
 mod component;
 mod component_random;
 mod component_internet;
 pub(crate) use component::{Component, CompScheduling};
 pub(crate) use component_pdl::{CompPDL};
 pub(crate) use component_context::{CompCtx, PortInstruction};
+pub(crate) use component_context::{CompCtx, PortInstruction, PortKind, PortState, PortStateFlag};
 pub(crate) use control_layer::{ControlId};
 use super::scheduler::*;
 use super::runtime::*;
 /// If the component is sleeping, then that flag will be atomically set to
 /// false. If we're the ones that made that happen then we add it to the work
 /// queue.
 pub(crate) fn wake_up_if_sleeping(runtime: &RuntimeInner, comp_id: CompId, handle: &CompHandle) {
     use std::sync::atomic::Ordering;
     let should_wake_up = handle.sleeping
         .compare_exchange(true, false, Ordering::AcqRel, Ordering::Acquire)
         .is_ok();
     if should_wake_up {
         let comp_key = unsafe{ comp_id.upgrade() };
         runtime.enqueue_work(comp_key);
+    }
+}
@@ \ No newline at end of file @@

0 comments (0 inline, 0 general)