EI/VirtualLeaf Changeset - ffb1f378901c · Centrum Wiskunde & Informatica (CWI)

Changeset - ffb1f378901c

Parent rev.

Child rev.

[Not reviewed]

Merge default

0 4 0

Roeland Merks - 15 years ago 2010-10-15 11:32:30
roeland.merks@cwi.nl

Merged one file - need to run now!

--
user: Roeland Merks <roeland.merks@cwi.nl>
branch merge
branch 'default'
changed src/ChangeLog
changed src/VirtualLeaf-install.nsi
changed src/VirtualLeaf.pro
changed src/canvas.cpp

4 files changed with 46 insertions and 14 deletions:

src/ChangeLog

src/VirtualLeaf-install.nsi

src/VirtualLeaf.pro

src/canvas.cpp

0 comments (0 inline, 0 general)

src/ChangeLog

➞

Show inline comments

 -10-14    <guravage@caterpie.sen.cwi.nl>
 	* VirtualLeaf.pro: Turned debug off to make all profiles must be
 	consistant.
 	* VirtualLeaf-install.nsi: Tweaked paths to coincide with UNIX
 	distribution, i.e. VirtualLeaf.exe, its libraries, models, and the
 	uninstaller all go in the bin directory. And leaves directory
 	placed under data directory.
 	* canvas.cpp (exportCellData): Added a check to inquire before
 	overwritting an existing file.
 -10-14    <merks@cwi.nl>
 	* mesh.cpp: In response to referees' comments, added new parameter "yield_threshold" instead of fixed parameter '4' for yield threshold.
 	* wallitem.cpp: when clicking a wall, both the wall type was cycled and the transporterdialog popped up. Corrected this - for wall type cycling, hold the Control button while left clicking. TransporterDialog only pops up for left click. Also made sure the wall is redrawn after changing the transporter values.
 	* cell.cpp (DivideWalls): accomodated for rename of Circumference -> WallCircumference
 	* hull.h: added an operator< to sort Points
 	* hull.cpp: added an operator< to sort Points
 	* cellbase.cpp (ExactCircumference): I added a new function ExactCircumference, yielding the circumference of the cell along its wall_elements
 	* cellbase.cpp (ExactCircumference): I added a new function
 	ExactCircumference, yielding the circumference of the cell along
 	its wall_elements
 	* VirtualLeaf.cpp: adjust info_string to accomodate for new name
 	of function CellBase::Circumference -> CellBase::WallCircumference
 	* VirtualLeaf.cpp: adjust info_string to accomodate for new name of function CellBase::Circumference -> CellBase::WallCircumference
 	* mesh.cpp: corrected Mesh::Compactness, the boundary coordinates need to be sorted in x,y order for the convex hull algorithm (thanks Margriet!). I updated CSVExportCellData so it exports the circumferences of hull and boundary_polygon.
 	* mesh.cpp: corrected Mesh::Compactness, the boundary coordinates
 	need to be sorted in x,y order for the convex hull algorithm
 	(thanks Margriet!). I updated CSVExportCellData so it exports the
 	circumferences of hull and boundary_polygon.
 -10-14    <guravage@caterpie.sen.cwi.nl>
 	* VirtualLeafpar.tmpl (export_fn_prefix): changed to 'cell.'
 	* canvas.cpp (TimeStepWrap): Removed TimeStamp(). Cell data
 	filename now incorporates iteration number.
 	* canvas.h (MainBase): Removed TimeStamp().
 -10-08    <guravage@caterpie.sen.cwi.nl>
 	* pardialog.h:
 	* pardialog.cpp:
 	* parameter.h:
 	* parameter.cpp: Regenerated to include export_interval and export_fn_prefix.
 	* VirtualLeafpar.tmpl: Appended export_interval and export_fn_prefix.
 	* canvas.h (MainBase): Declared polymorphic exportCellData() functions.
 	* canvas.cpp:
 	(TimeStamp): New private TimeStamp() function.
 	(TimeStepWrap): Added invocation of exportCellData().
 	(exportCellData): Created two polymorphic functions: one with a
 	single QString argument, the other with no argument. The former is
 	called from TimeStepWrap() while the latter is called from the
 	"Export cell areas" item in the file menu.
 -10-07    <guravage@caterpie.sen.cwi.nl>
 	* canvas.cpp (exportCellData): Added a Q3FileDialog to inquire
 	where to write the exportCellData.
 -06-28    <guravage@caterpie.sen.cwi.nl>
 	* VirtualLeaf-install.nsi: Grab gpl3.txt from doc directory.
 	* canvas.cpp (gpl): gpl3.txt can be either in an ancestor doc
 	directory (Linux) or a decedent doc directory (Windows, via the
 	binary installer).
 	* VirtualLeaf-install.nsi: Add VirtualLeaf doc directory.
 -06-25    <guravage@caterpie.sen.cwi.nl>
 	* gpl3.txt: Moved gpl3.txt from doc to src directory.
 	* VirtualLeaf.pro: Added -Wno-write-strings and -Wno-unused-parameter to QMAKE_CXXFLAGS.
 	* libplugin.pro: Ditto.
 	* parameter.cpp: Result of adding datadir changes to make_parameter_source.pl.
 	* parameter.h: Ditto.
 	* output.h: Declared new function (AppendHomeDirIfPathRelative).
 	* output.cpp (AppendHomeDirIfPathRelative): Added new function.
 	* canvas.cpp (gpl): Moving gpl3.txt from doc to src obviates the need to docDir.cd("../doc").
 	* VirtualLeaf-install.nsi: Grab gpl3.txt from src directory.
 	Add missing libiconv/bin, libxml2bin and libz/bin directories.
 	Copy libiconv-2.dll, libxml2.dll and zlib1.dll from relative paths.
 	* VirtualLeaf.pro: copy gpl3.txt as part of QMAKE_POST_LINK.
 -06-24    <guravage@caterpie.sen.cwi.nl>
 	* libplugin.pro: Use correct library path.
 	* VirtualLeaf.pro: Ditto.
 	* VirtualLeaf.cpp (DrawCell): Iterate over NChem to construct info_string.
 -06-23    <guravage@caterpie.sen.cwi.nl>
 	* simitembase.cpp: Removed NULL assignments to unused variables.
 	* VirtualLeaf.cpp: Ditto.
 	* apoplastitem.cpp: Ditto.
 	* canvas.cpp: Ditto.
 	* cell.cpp: Ditto.
 	* cellbase.h: Ditto.
 	* forwardeuler.cpp: Ditto.
 	* mainbase.h: Ditto.
 	* nodeitem.cpp: Ditto.
 	* qcanvasarrow.h: Ditto.
 	* simitembase.cpp: Ditto.
 	* Makefile (clean): Add -f Makefile argument to each make invocation.
 	* VirtualLeaf-install.nsi: New gpl license text.
 	* VirtualLeaf.pro: Disabled console mode.
 	* mesh.cpp (Clear): Added parentheses to qDebug statments.
 	(TestIllegalWalls): Replaced qDebug().
 	* canvas.cpp (mouseReleaseEvent): Replaced qDebug() with cerr since qDebug complains about *node_set.
 	* wall.cpp (CorrectWall): Rplaced gDebug() with cerr in transform call and when printing *this.
 -06-22    <guravage@caterpie.sen.cwi.nl>
 	* Makefile (tutorials): Add tutorials target.
 -06-21    <guravage@caterpie.sen.cwi.nl>
 	* parameter.cpp: Added particular reassignment of datadir.
 	* canvas.cpp (gpl): Added GPL3 License text. Display detail text only if the source text file exists.
 -06-18    <guravage@caterpie.sen.cwi.nl>
 	* canvas.cpp (gpl): Added gpl slot to display GPL license.
 	* VirtualLeaf.pro: Changed default LIBXML2DIR, LIBICONVDIR and LIBZDIR to corresponding distribution lib directories.
 	* libplugin.pro: Ditto.
 	* Makefile (clean): add if stmt not to `touch` on windows.
 -06-17    <guravage@caterpie.sen.cwi.nl>
 	* VirtualLeaf.pro: Removed perl references.
 	* libplugin.pro: Ditto.
 -06-15    <guravage@caterpie.sen.cwi.nl>
 	* VirtualLeaf.pro: Removed xmlwritecode.cpp from SOURCES list.
 	* xmlwrite.cpp (XMLSave): Removed references to XMLWriteLeafSourceCode and XMLWriteReactionsCode.
 	* xmlwrite.h (XMLIO): Ditto!
 	* mesh.cpp (findNextBoundaryNode): Initialize Node *next_boundary_node = NULL;
 	* xmlwrite.cpp (XMLReadSimtime): Removed unused variable cur
 	(XMLReadWalls): viz_flux need not be declared twice; default value of 0.0.
 	(XMLReadCells): Removed unused count variable.
 	(XMLReadSimtime): Removed unused cur variable.
 	(XMLRead): Removed unused v_str variable.
 	* simitembase.cpp (userMove): Use assignment merely to obviate compilation warning.
 	(SimItemBase) Ditto.
 	* qcanvasarrow.h (QGraphicsLineItem): Use assignment merely to obviate compilation warning.
 	* output.cpp (OpenWriteFile): Removed unused par variable.
 	* nodeitem.cpp (paint): Use assignment merely to obviate compilation warning.
 	* forwardeuler.cpp (odeint): Use assignment merely to obviate compilation warning.
 	* cell.cpp (DivideOverGivenLine): Use assignment merely to obviate compilation warning.
 	* canvas.cpp (FigureEditor): Use assignments merely to obviate compilation errors.
 	(mousePressEvent): Removed unused item variable.
 	* apoplastitem.cpp
 	(ApoplastItem): Removed unused par variable.
 	(OnClick): Use NULL assignment merely to obviate compilation warning.
 	* mainbase.h (MainBase): Use assignment merely to obviate compilation warning.
 	* cellbase.h (CellsStaticDatamembers): Use assignment merely to obviate compilation warning.
 	* cell.cpp: Wrapped diagnostic output in QDEBUG blocks.
 	* VirtualLeaf.cpp ditto.
 	* canvas.cpp ditto.
 	* cell.cpp ditto.
 	* data_plot.cpp ditto.
 	* forwardeuler.cpp ditto.
 	* mesh.cpp ditto.
 	* mesh.h
 	* random.cpp ditto.
 	* wall.cpp ditto.
 	* wallbase.cpp ditto.
 	* wallitem.cpp ditto.
 -06-07    <guravage@caterpie.sen.cwi.nl>
 	* VirtualLeaf.pro: Removed explicit perl invocation to regerenerate parameter files.
 	* libplugin.pro: ditto.
 -06-03    <guravage@caterpie.sen.cwi.nl>
 	* pardialog.h: Added default versions of this automatically generated file.
 	* pardialog.cpp: ditto.
 	* parameter.h: ditto.
 	* parameter.cpp: ditto.
 	* VirtualLeaf.pro: delete/generate  parameter.{h,cpp}and pardialog.{h,cpp} only if perl is installed.
  	* libplugin.pro: dito.
 	* Makefile: Added top-level Makefile
 -05-10    <guravage@caterpie.sen.cwi.nl>
 	* VirtualLeaf.pro: Added -fPIC option to QMAKE_CXXFLAGS.

src/VirtualLeaf-install.nsi

➞

Show inline comments

 # $Id$
 # appends \ to the path if missing
 # example: !insertmacro GetCleanDir "c:\blabla"
 # Pop $0 => "c:\blabla\"
 !macro GetCleanDir INPUTDIR
   ; ATTENTION: USE ON YOUR OWN RISK!
   ; Please report bugs here: http://stefan.bertels.org/
   !define Index_GetCleanDir 'GetCleanDir_Line${__LINE__}'
   Push $R0
   Push $R1
   StrCpy $R0 "${INPUTDIR}"
   StrCmp $R0 "" ${Index_GetCleanDir}-finish
   StrCpy $R1 "$R0" "" -1
   StrCmp "$R1" "\" ${Index_GetCleanDir}-finish
   StrCpy $R0 "$R0\"
 ${Index_GetCleanDir}-finish:
   Pop $R1
   Exch $R0
   !undef Index_GetCleanDir
 !macroend
 # similar to "RMDIR /r DIRECTORY", but does not remove DIRECTORY itself
 # example: !insertmacro RemoveFilesAndSubDirs "$INSTDIR"
 !macro RemoveFilesAndSubDirs DIRECTORY
   # ATTENTION: USE ON YOUR OWN RISK!
   # Please report bugs here: http://stefan.bertels.org/
   !define Index_RemoveFilesAndSubDirs 'RemoveFilesAndSubDirs_${__LINE__}'
   Push $R0
   Push $R1
   Push $R2
   !insertmacro GetCleanDir "${DIRECTORY}"
   Pop $R2
   FindFirst $R0 $R1 "$R2*.*"
 ${Index_RemoveFilesAndSubDirs}-loop:
   StrCmp $R1 "" ${Index_RemoveFilesAndSubDirs}-done
   StrCmp $R1 "." ${Index_RemoveFilesAndSubDirs}-next
   StrCmp $R1 ".." ${Index_RemoveFilesAndSubDirs}-next
   IfFileExists "$R2$R1\*.*" ${Index_RemoveFilesAndSubDirs}-directory
   ; file
   Delete "$R2$R1"
   goto ${Index_RemoveFilesAndSubDirs}-next
 ${Index_RemoveFilesAndSubDirs}-directory:
   ; directory
   RMDir /r "$R2$R1"
 ${Index_RemoveFilesAndSubDirs}-next:
   FindNext $R0 $R1
   Goto ${Index_RemoveFilesAndSubDirs}-loop
 ${Index_RemoveFilesAndSubDirs}-done:
   FindClose $R0
   Pop $R2
   Pop $R1
   Pop $R0
   !undef Index_RemoveFilesAndSubDirs
 !macroend
 !define PRODUCT_NAME "The Virtual Leaf"
 !define PRODUCT_VERSION "1.0"
 !define PRODUCT_PUBLISHER "Center for Mathematics and Computer Science (CWI)"
 !define PRODUCT_WEB_SITE "www.cwi.nl"
 !define EXECUTABLE "VirtualLeaf.exe"
 !define PROGICON "leaficon.ico"
 !define SETUP_BITMAP "leaficon.ico"
 # MUI 1.67 compatible ------
 !include "MUI.nsh"
 !include "EnvVarUpdate.nsh"
 # MUI Settings
 !define MUI_ABORTWARNING
 !define MUI_ICON "leaficon.ico"
 !define MUI_UNICON "leaficon.ico"
 # Welcome page
 !insertmacro MUI_PAGE_WELCOME
 # License page
 !insertmacro MUI_PAGE_LICENSE "..\doc\gpl3.txt"
 # Components page
 !insertmacro MUI_PAGE_COMPONENTS
 # Directory page
 !insertmacro MUI_PAGE_DIRECTORY
 # Instfiles page
 !insertmacro MUI_PAGE_INSTFILES
 # Finish page
 !insertmacro MUI_PAGE_FINISH
 # Uninstaller pages
 !insertmacro MUI_UNPAGE_CONFIRM
 !insertmacro MUI_UNPAGE_INSTFILES
 !insertmacro MUI_UNPAGE_FINISH
 # Language files
 !insertmacro MUI_LANGUAGE "English"
 # MUI end ------
 # set the name of the installer
 outfile "VirtualLeaf-install.exe"
 Name "${PRODUCT_NAME} ${PRODUCT_VERSION}"
 ShowInstDetails show
 ShowUnInstDetails show
 # define the directory to install to
 installDir C:\VirtualLeaf
 # Request application privileges
 RequestExecutionLevel user
 section "Virtual Leaf executable"
   #sectionIn RO
   # define the output path for the Virtual Leaf executable
   setOutPath $INSTDIR
   writeUninstaller $INSTDIR\uninstaller.exe
   setOutPath $INSTDIR\bin
   writeUninstaller $INSTDIR\bin\uninstaller.exe
   file ..\bin\VirtualLeaf.exe
   # Required DLLs
   setOutPath $INSTDIR\bin
   file ..\lib\libiconv\bin\libiconv-2.dll
   file ..\lib\libxml2\lib\libxml2.dll
   file ..\lib\libz\bin\zlib1.dll
   # Is the pegging of these DLLs to a specific QT version a problem?
   file C:\Qt\2010.02.1\mingw\bin\mingwm10.dll
   file C:\Qt\2010.02.1\mingw\bin\libgcc_s_dw2-1.dll
   file C:\Qt\2010.02.1\qt\bin\Qt3Support4.dll
   file C:\Qt\2010.02.1\qt\bin\QtCore4.dll
   file C:\Qt\2010.02.1\qt\bin\QtGui4.dll
   file C:\Qt\2010.02.1\qt\bin\QtNetwork4.dll
   file C:\Qt\2010.02.1\qt\bin\QtSql4.dll
   file C:\Qt\2010.02.1\qt\bin\QtXml4.dll
   # Prepend the Virtual Leaf bin directory to the installers PATH
   ${EnvVarUpdate} $0 "PATH" "P" "HKCU" "$INSTDIR\bin"
 sectionEnd
 section "Virtual Leaf plugins"
   # define the output path for the Virtual Leaf models
   setOutPath $INSTDIR\models
+  setOutPath $INSTDIR\bin\models
   file ..\bin\models\*
 sectionEnd
 section "Virtual Leaf data"
   # define the output path for the Virtual Leaf models
   setOutPath $INSTDIR\leaves
+  setOutPath $INSTDIR\data\leaves
   file ..\data\leaves\*
 sectionEnd
 section "Virtual Leaf docs"
   # define the output path for the Virtual Leaf documentation
   setOutPath $INSTDIR\doc
   file ..\doc\*
 sectionEnd
 # create a section to define what the uninstaller does.
 # the section will always be named "Uninstall"
 section "Uninstall"
   # Always delete uninstaller first
   delete $INSTDIR\uninstaller.exe
   # Now delete installed file
   !insertmacro RemoveFilesAndSubDirs "$INSTDIR"
   # Last but not least - delete the path
   ${un.EnvVarUpdate} $0 "PATH" "R" "HKCU" "$INSTDIR\bin"
 sectionEnd
 # finis

src/VirtualLeaf.pro

➞

Show inline comments

+#
 #  $Id$
+#
 #  This file is part of the Virtual Leaf.
+#
 #  The Virtual Leaf is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
 #  the Free Software Foundation, either version 3 of the License, or
 #  (at your option) any later version.
+#
 #  The Virtual Leaf is distributed in the hope that it will be useful,
 #  but WITHOUT ANY WARRANTY; without even the implied warranty of
 #  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 #  GNU General Public License for more details.
+#
 #  You should have received a copy of the GNU General Public License
 #  along with the Virtual Leaf.  If not, see <http://www.gnu.org/licenses/>.
+#
 #  Copyright 2010 Roeland Merks.
+#
 CONFIG -= release
 CONFIG += debug
 CONFIG += release
 CONFIG -= debug
 CONFIG += qt
 QMAKE_CXXFLAGS += -fexceptions
 QMAKE_CXXFLAGS += -Wall
 QMAKE_CXXFLAGS += -Wno-write-strings
 QMAKE_CXXFLAGS += -Wno-unused-parameter
 QMAKE_CXXFLAGS_DEBUG += -g3
 QMAKE_CXXFLAGS_DEBUG += -DQDEBUG
 #REACTIONS = reactions_auxin_growth.h
 #REACTIONS = reactions_meinhardt.h
 #REACTIONS = reactions_pce_growth.h
 DEFINES += QTGRAPHICS
 DEFINES += REACTIONS_HEADER=$${REACTIONS}
 DEFINES += REACTIONS_HEADER_STRING=\"$${REACTIONS}\"
 DEFINES += FLEMING
 BINDIR = ../bin
 LIBDIR = ../lib
 DESTDIR = $$BINDIR
 TARGET = VirtualLeaf
 TEMPLATE = app
 PARTMPL = $${TARGET}par.tmpl
 MAINSRC = $${TARGET}.cpp
 QT -= network sql xml
 QT += qt3support
 !win32 {
  GRAPHICS = qt #qwt
+}
 win32 {
  CONFIG -= console
  LIBXML2DIR = $${LIBDIR}\libxml2
  LIBICONVDIR = $${LIBDIR}\libiconv
  LIBZDIR = $${LIBDIR}\libz
  GRAPHICS = qt
  RC_FILE = VirtualLeaf.rc
  QMAKE_CXXFLAGS += -DLIBXML_STATIC
  QMAKE_CXXFLAGS += -I$${LIBXML2DIR}\include -I$${LIBICONVDIR}\include -I$${LIBZDIR}\include
  LIBS += -L$${LIBXML2DIR}\lib -lxml2 -L$${LIBICONVDIR}\lib -L$${LIBZDIR}\lib  -lz -lm -lwsock32 -liconv
+}
 macx:release {
  LIBS+= -dead_strip
+}
 unix {
  CC = /usr/bin/gcc
  QWTDIR = /ufs/guravage/opt/qwt-5.2.1-svn
  QMAKE_LIBDIR += $$QWTDIR/lib
  QMAKE_CXXFLAGS += -fPIC -I/usr/include/libxml2
  QMAKE_LFLAGS += -fPIC
  LIBS += -lxml2 -lz -lm
+}
 # Input
 HEADERS += \
 # apoplastitem.h \
  canvas.h \
  cellbase.h \
  cell.h \
  cellitem.h \
  forwardeuler.h \
        hull.h \
  infobar.h \
  mainbase.h \
  mainbase.h \
  matrix.h \
  mesh.h \
  miscq.h \
  modelcatalogue.h \
  Neighbor.h \
  node.h \
  nodeitem.h \
  nodeset.h \
  OptionFileDialog.h \
  output.h \
  parameter.h \
  pardialog.h \
  parse.h \
  pi.h \
  qcanvasarrow.h \
  random.h \
  rungekutta.h \
  simitembase.h \
  simplugin.h \
  sqr.h \
  tiny.h \
  transporterdialog.h \
  UniqueMessage.h \
  vector.h \
  wallbase.h \
  wall.h \
  wallitem.h \
  warning.h \
  xmlwrite.h \
  $${PARTMPL}
 SOURCES += \
 # apoplastitem.cpp \
  canvas.cpp \
  cellbase.cpp \
  cell.cpp \
  cellitem.cpp \
  forwardeuler.cpp \
  hull.cpp \
  mainbase.cpp \
  matrix.cpp \
  mesh.cpp \
  miscq.cpp \
  modelcatalogue.cpp \
  Neighbor.cpp \
  node.cpp \
  nodeitem.cpp \
  nodeset.cpp \
  OptionFileDialog.cpp \
  output.cpp \
  parameter.cpp \
  pardialog.cpp \
  parse.cpp \
  random.cpp \
  rungekutta.cpp \
  simitembase.cpp \
  transporterdialog.cpp \
  UniqueMessage.cpp \
  vector.cpp \
  wallbase.cpp \
  wall.cpp \
  wallitem.cpp \
  warning.cpp \
  xmlwrite.cpp \
  $$MAINSRC
 contains( TARGET, leaf_fleming ) {
  DEFINES += FLEMING
+}
 contains(GRAPHICS, qwt) {
  #macx:LIBS += -L$$QWTDIR/lib -lqwt
  #win32:LIBS += -L$$QWTDIR/lib -lqwt5
  #LIBS += -L$$QWTDIR/lib -lqwt
  INCLUDEPATH += $$QWTDIR/include
  DEFINES += HAVE_QWT
  HEADERS += data_plot.h
  SOURCES += data_plot.cpp
+}
 contains( GRAPHICS, qt ) {
  message( "Building Qt executable" )
  QMAKE_CXXFLAGS += -DQTGRAPHICS # -fpermissive
+}
 contains( GRAPHICS, xfig ) {
  message("Building Xfig executable (background runnable).")
  QMAKE_CXXFLAGS += -DXFIGGRAPHICS
+}
 contains( GRAPHICS, x11 ) {
  !unix {
   error("X11 graphics only available on Unix systems.")
+ }
  message("Building X11 executable")
  SOURCES += x11graph.cpp
  HEADERS += x11graph.h
  QMAKE_CXXFLAGS += -DX11GRAPHICS
  CONFIG -= qt
  CONFIG += x11
  unix:LIBS += -lpng
+}
 #contains( GRAPHICS, qwt ) {
 # 	QMAKE_POST_LINK = "install_name_tool -change libqwt.5.dylib $$QWTDIR/lib/libqwt.dylib $${TARGET}.app/Contents/MacOS/$${TARGET}; \
 #}
 # MACOSX packaging
 macx {
 ICON = leaficon.icns
 QMAKE_POST_LINK = "\
 	#install_name_tool -change libqwt.5.dylib $$QWTDIR/lib/libqwt.dylib $${TARGET}.app/Contents/MacOS/$${TARGET}; \
 	cp leaficon.icns $${DESTDIR}/$${TARGET}.app; \
 	cp gpl3.txt $${DESTDIR}/$${TARGET}.app/Contents/MacOS/.                                    ; \
 	mkdir $${DESTDIR}/$${TARGET}.app/Contents/Frameworks; \
 	cp -R /Library/Frameworks/QtCore.framework $${DESTDIR}/$${TARGET}.app/Contents/Frameworks; \
 	cp -R /Library/Frameworks/QtGui.framework $${DESTDIR}/$${TARGET}.app/Contents/Frameworks; \
 	cp -R /Library/Frameworks/Qt3Support.framework $${DESTDIR}/$${TARGET}.app/Contents/Frameworks; \
 	#cp /usr/local/qwt/lib/libqwt.dylib $${DESTDIR}/$${TARGET}.app/Contents/Frameworks; \
 	#install_name_tool -id @executable_path/../Frameworks/libqwt.dylib $${DESTDIR}/$${TARGET}.app/Contents/Frameworks/libqwt.dylib; \
 	install_name_tool -change /usr/local/qwt/lib/libqwt.dylib @executable_path/../Frameworks/libqwt.dylib $${DESTDIR}/$${TARGET}.app/Contents/MacOS/$${TARGET};\
 	install_name_tool -id @executable_path/../Frameworks/QtCore.framework/Versions/Current/QtCore $${DESTDIR}/$${TARGET}.app/Contents/Frameworks/QtCore.framework/Versions/4.0/QtCore; \
 	install_name_tool -id @executable_path/../Frameworks/QtGui.framework/Versions/Current/QtGui $${DESTDIR}/$${TARGET}.app/Contents/Frameworks/QtGui.framework/Versions/4.0/QtGui; \
 	install_name_tool -id @executable_path/../Frameworks/Qt3Support.framework/Versions/Current/Qt3Support $${DESTDIR}/$${TARGET}.app/Contents/Frameworks/Qt3Support.framework/Versions/4.0/Qt3Support; \
 	install_name_tool -change Frameworks/QtCore.framework/Versions/Current/QtCore @executable_path/../Frameworks/QtCore.framework/Versions/4.0/QtCore $${DESTDIR}/$${TARGET}.app/Contents/MacOS/$${TARGET}; \
 	install_name_tool -change Frameworks/QtGui.framework/Versions/Current/QtGui @executable_path/../Frameworks/QtGui.framework/Versions/4.0/QtGui $${DESTDIR}/$${TARGET}.app/Contents/MacOS/$${TARGET}; \
 	install_name_tool -change Frameworks/Qt3Support.framework/Versions/Current/Qt3Support @executable_path/../Frameworks/Qt3Support.framework/Versions/4.0/Qt3Support $${DESTDIR}/$${TARGET}.app/Contents/MacOS/$${TARGET}; \
 	install_name_tool -change Frameworks/QtCore.framework/Versions/Current/QtCore @executable_path/../Frameworks/QtCore.framework/Versions/4.0/QtCore $${DESTDIR}/$${TARGET}.app/Contents/Frameworks/Qt3Support.framework/Versions/4.0/Qt3Support; \
 	install_name_tool -change Frameworks/QtGui.framework/Versions/Current/QtGui @executable_path/../Frameworks/QtGui.framework/Versions/4.0/QtGui $${DESTDIR}/$${TARGET}.app/Contents/Frameworks/Qt3Support.framework/Versions/4.0/Qt3Support; \
 	install_name_tool -change Frameworks/QtCore.framework/Versions/Current/QtCore @executable_path/../Frameworks/QtCore.framework/Versions/4.0/QtCore $${DESTDIR}/$${TARGET}.app/Contents/Frameworks/Qt3Support.framework/Versions/4.0/Qt3Support; "
+}
 # finis

src/canvas.cpp

➞

Show inline comments

@@ @@ -310,1102 +310,1112 @@ void FigureEditor::mouseReleaseEvent(QMo @@
 	// sometimes the cell hasn't properly divided yet before the
 	// next division is called?  so check for it?  let's find a way
 	// to do this later. Note that this functionality currently
 	// might result in a segmentation fault for users who are
 	// quickly dragging and releasing division lines...
 	scene()->update();
 #ifdef QDEBUG
 	qDebug() << "Dividing Cell " << c.Index() << endl;
 #endif
 	c.DivideOverGivenLine( startpoint, endpoint, true, node_set);
+      }
       node_set->CleanUp();
       mesh.AddNodeSet(node_set);
 #ifdef QDEBUG
       qDebug() << "Done DivideOverGivenLine" << endl;
 #endif
       mesh.TestIllegalWalls();
       // Do the actual cutting and removing
       if (intersected_cells.size()) {
 	mesh.CutAwayBelowLine( startpoint, endpoint );
 	// Correct flags of nodeset
 	for (NodeSet::iterator i = node_set->begin(); i != node_set->end(); i++) {
 	  (*i)->SetSAM();
 	  (*i)->SetBoundary();
+	}
 	// Make cells attached to nodeset part of the boundary
 	// This is a temporary solution for the following:
 	//   If a cell attached to a NodeSet divides (with a division plane intersecting the node set),
 	//   we must insert a new node into the node set.
 	// For now, we add a layer of "virtual cells" inbetween.
 	list<Cell *> cells_attached_to_nodeset = node_set->getCells();
 	for ( list<Cell *>::iterator c = cells_attached_to_nodeset.begin(); c != cells_attached_to_nodeset.end(); c++) {
 	  (*c)->SetBoundary(Cell::SAM);
+	}
 #ifdef QDEBUG
 	qDebug() << "Done CutAwayBelowLine" << endl;
 #endif
 	mesh.TestIllegalWalls();
 	mesh.RepairBoundaryPolygon();
 #ifdef QDEBUG
 	qDebug() << "Done RepairBoundaryPolygon" << endl;
 #endif
 	mesh.TestIllegalWalls();
 	mesh.CleanUpWalls();
 #ifdef QDEBUG
 	qDebug() << "Done CleanUpWalls" << endl;
 #endif
 	mesh.TestIllegalWalls();
+      }
       dynamic_cast<Main *>(parent())->Plot();
 #ifdef QDEBUG
       cerr << "NodeSet of cutting line: " << *node_set << endl;
 #endif
+    }
   } else
     if (e->button()==Qt::RightButton) {
       if (intersection_line /* && !angle_line*/) {
 	QPointF p = mapToScene(e->pos());
 	QPointF sp = intersection_line->line().p1();
 	viewport()->setMouseTracking( TRUE );
+      }
+    }
+}
 // returns a vector of pointer to cells colliding with intersection line
 vector <CellItem *> FigureEditor::getIntersectedCells(void)
+{
   vector <CellItem *> colliding_cells;
   QList<QGraphicsItem *> l = intersection_line->collidingItems( );
 #ifdef QDEBUG
   qDebug() <<  "l.size() = " << l.size() << endl;
 #endif
   for (QList<QGraphicsItem *>::Iterator it=l.begin(); it!=l.end(); ++it) {
 #ifdef QDEBUG
     qDebug() << typeid(**it).name() << endl;
 #endif
     if ( !strcmp(typeid(**it).name(),"8CellItem") ) {
       colliding_cells.push_back(dynamic_cast<CellItem *>(*it));
+    }
+  }
   delete intersection_line;
   intersection_line = 0;
   return colliding_cells;
+}
 void FigureEditor::FullRedraw(void)
+{
   QList<QRectF> rl;
   rl << sceneRect();
   updateScene(rl);
+}
 NodeItem *FigureEditor::selectedNodeItem(QList<QGraphicsItem *> graphicItems) const
+{
   NodeItem *nodeItem = 0;
   // graphicItems is a list of the QgraphicItems under the mouse click event
   QList<QGraphicsItem *>::Iterator it = graphicItems.begin();
   for (; it != graphicItems.end(); ++it) {
     if ( !strcmp(typeid(**it).name(),"8NodeItem")) {
       // the object under the mouse click is a Nodeitem
       nodeItem = dynamic_cast<NodeItem *>(*it);
       // indicate we've selected it
       nodeItem->setBrush(dark_red);
       break;
+    }
+  }
   return nodeItem;
+}
 void FigureEditor::insertNode(QPointF p)
+{
   Node *node = new Node(p.x(), p.y(), 0);
   mesh.AddNode(node);
   scene()->clearSelection();
   dynamic_cast<Main *>(parent())->Plot();
   FullRedraw();
 #ifdef QDEBUG
   qDebug() << "Node: " << p << endl;
 #endif
+}
 static uint mainCount = 0;
 Main::Main(QGraphicsScene& c, Mesh &m, QWidget* parent, const char* name, Qt::WindowFlags f) :
   Q3MainWindow(parent,name,f),
   MainBase(c,m),
   mesh(m)
+{
   editor = new FigureEditor(canvas,mesh, this);
 #ifdef QDEBUG
   qDebug() << "Interactive = " << editor->isEnabled();
 #endif
   working_dir = 0;
   QObject::connect( editor, SIGNAL(MousePressed()), this, SLOT(PauseIfRunning()));
   QObject::connect( editor, SIGNAL(MouseReleased()), this, SLOT(ContIfRunning()));
   QMenuBar* menu = menuBar();
   Q3PopupMenu* file = new Q3PopupMenu( menu );
   file->insertItem("&Read leaf", this, SLOT(readStateXML()));
   file->insertItem("&Save leaf", this, SLOT(saveStateXML()));
   file->insertItem("Snapshot", this, SLOT(snapshot()), Qt::CTRL+Qt::SHIFT+Qt::Key_S);
   file->insertSeparator();
   file->insertItem("Read next leaf", this, SLOT(readNextStateXML()), Qt::Key_PageDown);
   file->insertItem("Read previous leaf", this, SLOT(readPrevStateXML()), Qt::Key_PageUp);
   file->insertItem("Read last leaf", this, SLOT(readLastStateXML()), Qt::Key_End);
   file->insertItem("Read first leaf", this, SLOT(readFirstStateXML()), Qt::Key_Home);
   file->insertItem("Export cell data", this, SLOT(exportCellData()));
   file->insertSeparator();
   file->insertItem("&Print...", this, SLOT(print()), Qt::CTRL+Qt::Key_P);
   file->insertSeparator();
   file->insertItem("E&xit", qApp, SLOT(quit()), Qt::CTRL+Qt::Key_Q);
   menu->insertItem("&File", file);
   Q3PopupMenu* edit = new Q3PopupMenu( menu );
   edit->insertItem("Reset Chemicals and Transporters", this, SLOT( CleanMesh()), Qt::CTRL+Qt::Key_R );
   edit->insertItem("Reset Chemicals", this, SLOT( CleanMeshChemicals()) );
   edit->insertItem("Reset Transporters", this, SLOT( CleanMeshTransporters()) );
   edit->insertItem("Randomize PIN1 Transporters", this, SLOT( RandomizeMesh()) );
   edit->insertItem("Cut away SAM", this, SLOT( CutSAM() ));
   menu->insertItem("&Edit", edit);
   run = new Q3PopupMenu( menu );
   running = false;
   paused_id = run->insertItem("&Simulation paused", this, SLOT(togglePaused()), Qt::Key_S);
   run->setItemChecked(paused_id, FALSE);
   menu->insertItem("&Run", run);
   view = new Q3PopupMenu( menu );
   view->insertItem("&Zoom in", this, SLOT(zoomIn()), Qt::CTRL+Qt::Key_Equal);
   view->insertItem("Zoom &out", this, SLOT(zoomOut()), Qt::CTRL+Qt::Key_Minus);
   view->insertSeparator();
   com_id = view->insertItem("Show cell &centers", this, SLOT(toggleShowCellCenters()));
   view->setItemChecked(com_id, FALSE);
   mesh_id = view->insertItem("Show &nodes", this, SLOT(toggleShowNodes()), Qt::CTRL+Qt::SHIFT+Qt::Key_N);
   view->setItemChecked(mesh_id, TRUE);
   node_number_id = view->insertItem("Show node numbers", this, SLOT(toggleNodeNumbers()), Qt::CTRL+Qt::SHIFT+Qt::Key_M);
   view->setItemChecked(node_number_id, FALSE);
   cell_number_id = view->insertItem("Show cell numbers", this, SLOT(toggleCellNumbers()));
   view->setItemChecked(cell_number_id, FALSE);
   hide_cells_id = view->insertItem("Hide cells", this, SLOT(toggleHideCells()));
   view->setItemChecked(hide_cells_id, FALSE);
   border_id = view->insertItem("Show &border cells", this, SLOT(toggleShowBorderCells()));
   view->setItemChecked(border_id, FALSE);
   cell_axes_id = view->insertItem("Show cell &axes", this, SLOT(toggleCellAxes()));
   cell_strain_id = view->insertItem("Show cell &strain", this, SLOT(toggleCellStrain()));
   view->setItemChecked(cell_axes_id, FALSE);
   fluxes_id = view->insertItem("Show &fluxes", this, SLOT(toggleShowFluxes()));
   view->setItemChecked(fluxes_id, FALSE);
   cell_walls_id = view->insertItem("Show transporters", this, SLOT(toggleShowWalls()));
   view->setItemChecked(cell_walls_id, FALSE);
  // apoplasts_id = view->insertItem("Show apoplasts", this, SLOT(toggleShowApoplasts()));
  // view->setItemChecked(apoplasts_id, FALSE);
   view->insertSeparator();
   only_boundary_id = view->insertItem("Show only leaf &boundary", this, SLOT(toggleLeafBoundary()));
   view->insertSeparator();
   movie_frames_id = view->insertItem("Start saving movie &frames", this, SLOT(toggleMovieFrames()));
   view->setItemChecked(movie_frames_id, par.movie);
   view->setItemChecked(only_boundary_id, FALSE);
   menu->insertItem("&View", view);
   options = new Q3PopupMenu( menu );
   dyn_cells_id = options->insertItem("Cell growth", this, SLOT(toggleDynCells()));
   options->setItemChecked(dyn_cells_id, true);
   options->insertItem("Edit &parameters", this, SLOT(EditParameters()), Qt::CTRL+Qt::Key_E);
   rotation_mode_id = options->insertItem("Rotate leaf", this, SLOT(EnterRotationMode()), Qt::CTRL + Qt::SHIFT + Qt::Key_R);
   options->setItemChecked(rotation_mode_id, false);
   menu->insertItem("&Options",options);
   // Menu of models
   modelmenu = new QMenu( menu );
   menu->insertItem("&Models", modelmenu);
   menu->insertSeparator();
   helpmenu = new Q3PopupMenu( menu );
   tooltips_id = helpmenu->insertItem("Show Cell&Info", this, SLOT(Refresh()));
   helpmenu->setItemChecked(tooltips_id, true);
   helpmenu->insertSeparator();
     //helpmenu->insertSeparator();
   helpmenu->insertItem("&LICENSE", this, SLOT(gpl()) );
   helpmenu->insertItem("About", this, SLOT(about()) ); //, Key_F1);
 	menu->insertItem("&Help",helpmenu);
   statusBar();
   setCentralWidget(editor);
   printer = 0;
   init();
   // Start timer which repetitively invokes
   // a simulation time step
   timer = new QTimer( this );
   connect( timer, SIGNAL(timeout()), SLOT(TimeStepWrap()) );
   stopSimulation();
   statusBar()->addWidget(new QLabel("Ready."));
   setCaption(caption);
   gifanim = 0;
   infobar = new InfoBar();
   addDockWindow(infobar);
+}
 void Main::RefreshInfoBar(void)
+{
   infobar->SetText(mesh.ModelID());
+}
 void Main::UserMessage(QString message, int timeout)
+{
   statusBar()->showMessage(message, timeout);
+}
 void Main::init()
+{
   clear();
   static int r=24;
   srand(++r);
   mainCount++;
+}
 Main::~Main()
+{
   delete printer;
   if ( !--mainCount ) {
+  }
   //EndGifAnim();
+}
 void Main::newView()
+{
   // Open a new view... have it delete when closed.
   Main *m = new Main(canvas, mesh, 0, 0, Qt::WDestructiveClose);
   qApp->setMainWidget(m);
   m->show();
   qApp->setMainWidget(0);
+}
 void Main::EditParameters()
+{
   ParameterDialog *pardial = new ParameterDialog(this, "stridediag");
   // Make sure the values in the parameter dialog are updated after a file is read
   // each method changing the parameters (reading XML or PAR files) should
   // emit this signal
   QObject::connect(   this, SIGNAL( ParsChanged() ), pardial, SLOT( Reset() ) );
+}
 void Main::savePars()
+{
   stopSimulation();
   Q3FileDialog *fd = new Q3FileDialog( this, "file dialog", TRUE );
   fd->setMode( Q3FileDialog::AnyFile );
   fd->setFilter( "Parameter files (*.par)");
   QString fileName;
   if ( fd->exec() == QDialog::Accepted ) {
     fileName = fd->selectedFile();
     ofstream parfile((const char *)fileName);
     par.Write(parfile);
+  }
   startSimulation();
+}
 void Main::readPars()
+{
   stopSimulation();
   Q3FileDialog *fd = new Q3FileDialog( this, "file dialog", TRUE );
   fd->setMode( Q3FileDialog::ExistingFile );
   fd->setFilter( "Parameter files (*.par)");
   QString fileName;
   if ( fd->exec() == QDialog::Accepted ) {
     fileName = fd->selectedFile();
     par.Read((const char *)fileName);
+  }
   emit ParsChanged();
+}
 void Main::saveStateXML()
+{
   stopSimulation();
   Q3FileDialog *fd = new Q3FileDialog( this, "file dialog", TRUE );
   fd->setMode( Q3FileDialog::AnyFile );
   fd->setFilter( "XML (*.xml)");
   QString fileName;
   if ( fd->exec() == QDialog::Accepted ) {
     fileName = fd->selectedFile();
     if ( QFile::exists( fileName ) &&
 	 QMessageBox::question(
 			       this,
 			       tr("Overwrite File? -- Leaf Growth"),
 			       tr("A file called %1 already exists."
 				  "Do you want to overwrite it?")
+				  " Do you want to overwrite it?")
 			       .arg( fileName ),
 			       tr("&Yes"), tr("&No"),
 			       QString::null, 1, 1 ) ) {
       return saveStateXML();
     } else {
       mesh.XMLSave((const char *)fileName, XMLSettingsTree());
+    }
+  }
+}
 void Main::snapshot()
+{
   stopSimulation();
   Q3FileDialog *fd = new Q3FileDialog( this, "Save snapshot", TRUE );
   fd->setMode( Q3FileDialog::AnyFile );
   QString fileName;
   if ( fd->exec() == QDialog::Accepted ) {
     fileName = fd->selectedFile();
     if ( QFile::exists( fileName ) &&
 	 QMessageBox::question(
 			       this,
 			       tr("Overwrite File? -- Leaf Growth"),
 			       tr("A file called %1 already exists."
 				  "Do you want to overwrite it?")
+				  " Do you want to overwrite it?")
 			       .arg( fileName ),
 			       tr("&Yes"), tr("&No"),
 			       QString::null, 1, 1 ) ) {
       return snapshot();
     } else {
       // extract extension from filename
       QString extension = getExtension(fileName);
       // Save bitmaps at 1024x768
       Save((const char *)fileName, extension, 1024, 768);
+    }
+  }
+}
 void Main::readPrevStateXML()
+{
   // if we have already read a file, read the next file
   if (!currentFile.isEmpty() && working_dir) {
     QString next_file;
     QStringList xml_files = working_dir->entryList("*.xml");
     QString currentFile_nopath = currentFile.section( '/', -1 );
     QString currentFile_path = currentFile.section( '/', 0, -2 );
     QList<QString>::iterator f = xml_files.find( currentFile_nopath );
     if (f == xml_files.end()) {
       return;
+    }
     if (f==xml_files.begin()) {
       QMessageBox mb( "Read previous leaf",
 		      "No more files",
 		      QMessageBox::Information,
 		      QMessageBox::Ok | QMessageBox::Default,
 		      QMessageBox::NoButton,
 		      QMessageBox::NoButton);
       mb.exec();
       return;
+    }
     next_file = *(--f);
     next_file = currentFile_path+"/"+next_file;
     readStateXML((const char *)next_file);
+  }
+}
 int Main::readStateXML(const char *filename, bool geometry, bool pars, bool simtime)
+{
   try {
     xmlNode *settings;
     mesh.XMLRead((const char *)filename, &settings, geometry, pars, simtime);
 #ifdef QDEBUG
     qDebug() << "Reading done."<< endl;
 #endif
     XMLReadSettings(settings);
     xmlFree(settings);
     Cell::SetMagnification(1);
     Cell::setOffset(0,0);
     FitLeafToCanvas();
     currentFile =  QString(filename);
     Plot();
     QString status_message = QString("Successfully read leaf from file %1. Time is %2 h.").arg(currentFile).arg(mesh.getTimeHours().c_str());
     cerr << status_message.toStdString() << endl;
     setCaption(caption_with_file.arg(filename));
     statusBar()->message(status_message);
     emit ParsChanged();
 #ifdef QDEBUG
     qDebug() << "Done. Returning 0." << endl;
 #endif
     return 0;
   } catch (const char *error_message) {
     QMessageBox mb( "Read leaf from XML file",
 		    QString(error_message),
 		    QMessageBox::Critical,
 		    QMessageBox::Ok | QMessageBox::Default,
 		    Qt::NoButton,
 		    Qt::NoButton);
     mb.exec();
     return 1;
+  }
+}
 void Main::readNextStateXML()
+{
   // if we have already read a file, read the next file
   if (!currentFile.isEmpty() && working_dir) {
     QString next_file;
     QStringList xml_files = working_dir->entryList("*.xml");
     QString currentFile_nopath = currentFile.section( '/', -1 );
     QString currentFile_path = currentFile.section( '/', 0, -2 );
     QList<QString>::iterator f = xml_files.find( currentFile_nopath );
     if (f == xml_files.end()) {
       return;
+    }
     ++f;
     if (f==xml_files.end()) {
       QMessageBox mb( "Read next leaf",
 		      "No more files",
 		      QMessageBox::Information,
 		      QMessageBox::Ok | QMessageBox::Default,
 		      QMessageBox::NoButton,
 		      QMessageBox::NoButton);
       mb.exec();
       return;
+    }
     next_file = *f;
     next_file = currentFile_path+"/"+next_file;
     readStateXML((const char*)next_file);
+  }
+}
 void Main::readLastStateXML()
+{
   // if we have already read a file, read the next file
   if (!currentFile.isEmpty() && working_dir) {
     QString next_file;
     QStringList xml_files = working_dir->entryList("*.xml");
     QString currentFile_nopath = currentFile.section( '/', -1 );
     QString currentFile_path = currentFile.section( '/', 0, -2 );
     next_file = xml_files.back();
     next_file = currentFile_path+"/"+next_file;
     readStateXML((const char*)next_file);
+  }
+}
 void Main::readFirstStateXML()
+{
   // if we have already read a file, read the next file
   if (!currentFile.isEmpty() && working_dir) {
     QString next_file;
     QStringList xml_files = working_dir->entryList("*.xml");
     QString currentFile_nopath = currentFile.section( '/', -1 );
     QString currentFile_path = currentFile.section( '/', 0, -2 );
     next_file = xml_files.front();
     next_file = currentFile_path+"/"+next_file;
     readStateXML((const char*)next_file);
+  }
+}
 void Main::readStateXML()
+{
   //  extern Mesh mesh;
   stopSimulation();
 #ifdef QDEBUG
   qDebug() << "Trying to open an OptionFileDialog" << endl;
 #endif
   OptionFileDialog *fd = new OptionFileDialog( this, "read dialog", TRUE );
   fd->setMode( OptionFileDialog::ExistingFile );
   fd->setFilter( "XML files (*.xml)");
   if (working_dir) {
     fd->setDir(*working_dir);
+  }
   QString fileName;
   if ( fd->exec() == QDialog::Accepted ) {
     fileName = fd->selectedFile();
     if (working_dir) {
       delete working_dir;
+    }
     working_dir = fd->dir();
     if (readStateXML((const char *)fileName,fd->readGeometryP(), fd->readParametersP()) )
       return readStateXML(); // user can try again
+  }
+}
 void Main::clear()
+{
   editor->clear();
+}
 void Main::about()
+{
   static QMessageBox* about = new QMessageBox
     ( "VirtualLeaf V1.0",
       "<h3>VirtualLeaf V1.0</h3>"
       "<p>"
       "An Open Source framework for cell-based modeling of plant tissue growth and development <br>"
       "(c) 2005-2008, Roeland Merks <i>et al.</i><br>"
       "    <a href=\"http://www.psb.vib-ugent.be\">VIB Department Plant Systems Biology</a>, "
       "Ghent, Belgium <br>"
       "(c) 2008-2010, <a href=\"http://www.cwi.nl/~merks\">Roeland Merks <i>et al.</i></a> <br>"
       "    <a href=\"http://www.cwi.nl\">Centrum Wiskunde & Informatica</a> and <a href=\"http://www.ncsb.nl\">Netherlands Consortium for Systems Biology</a>, Amsterdam, Netherlands <br>"
 "<br>VirtualLeaf is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.<br>"
       "<br>If you use this code for your projects, please cite our paper:"
 "<br>Merks, Guravage, Inze, and Beemster. An Open Source framework for cell-based modeling of plant tissue growth and development. <i>Plant Physiology,</i> submitted.<br> . <br>"
       "<br>Please share your model plugins and extensions at <a href=\"http://virtualleaf.googlecode.com\">http://virtualleaf.googlecode.com</a>.",
       QMessageBox::Information, 1, 0, 0, this, 0, FALSE );
   about->setButtonText( 1, "Dismiss" );
   about->show();
+}
 void Main::gpl()
+{
   static QMessageBox* gpl = new QMessageBox ( "GPL License", "",
       QMessageBox::Information, 1, 0, 0, this, 0, FALSE );
   QDir docDir(QApplication::applicationDirPath());
   docDir.cd("../doc"); // Where Linux expects gpl3.txt
   QString path = docDir.filePath("gpl3.txt");
   if (!docDir.exists("gpl3.txt")){
     docDir = QApplication::applicationDirPath();
     docDir.cd("doc"); // Where Windows expects gpl3.txt
     path = docDir.filePath("gpl3.txt");
+  }
   // At this point path points either to the linux variant, which
   // exists, or the windows variant, which may exist. Testing the
   // ifstream object will determine whether we've found gpl3.txt.
   std::ifstream file(path.toStdString().c_str());
   std::string str;
   if (file) {
     file.seekg(0, std::ios::end);
     str.reserve(file.tellg());
     file.seekg(0, std::ios::beg);
     str.assign((std::istreambuf_iterator<char>(file)),
 	       std::istreambuf_iterator<char>());
     gpl->setDetailedText(QString(str.c_str()));
+  }
   gpl->setText(QString( "<h3>GNU GENERAL PUBLIC LICENSE</h3>"
 			"<p>Version 3, 29 June 2007</p>"
 			"<p>Copyright &copy; 2007 Free Software Foundation, Inc. "
 			"&lt;<a href=\"http://fsf.org/\">http://fsf.org/</a>&gt;</p><p>"
 			"Everyone is permitted to copy and distribute verbatim copies "
 			"of this license document, but changing it is not allowed.</p>"
 			"<h2>GNU GENERAL PUBLIC LICENSE</h2>"));
   gpl->setButtonText( 1, "Dismiss" );
   gpl->show();
+}
 void Main::aboutQt(){
   QMessageBox::aboutQt( this, "Virtual Leaf" );
+}
 void Main::toggleShowCellCenters()
+{
   Plot();
+}
 void Main::toggleShowWalls()
+{
   Plot();
+}
 void Main::toggleShowApoplasts()
+{
   Plot();
+}
 void Main::toggleShowNodes()
+{
   Plot();
+}
 void Main::toggleNodeNumbers(void)
+{
   Plot();
+}
 void Main::toggleCellNumbers(void)
+{
   Plot();
+}
 void Main::toggleCellAxes(void)
+{
   Plot();
+}
 void Main::toggleCellStrain(void)
+{
   Plot();
+}
 void Main::toggleShowFluxes(void)
+{
   Plot();
+}
 void Main::toggleShowBorderCells()
+{
   Plot();
+}
 void Main::toggleHideCells(void)
+{
   Plot();
   editor->FullRedraw();
+}
 void Main::toggleMovieFrames(){}
 void Main::toggleLeafBoundary(){}
 void Main::toggleDynCells() {}
 void Main::startSimulation(void)
+{
   timer->start( 0 );
   statusBar()->message("Simulation started");
   running = true;
+}
 void Main::stopSimulation(void)
+{
   timer->stop();
   cerr << "Stopping simulation" << endl;
   statusBar()->message("Simulation paused");
   running = false;
+}
 void Main::togglePaused()
+{
   bool s = run->isItemChecked(paused_id);
   if (s) {
     cerr << "Calling start simulation" << endl;
     startSimulation();
   } else {
     cerr << "Calling stop simulation" << endl;
     stopSimulation();
+  }
+}
 void Main::setFluxArrowSize(int size)
+{
   flux_arrow_size = size/100.;
+}
 void Main::enlarge()
+{
   canvas.setSceneRect( QRectF( 0,0, canvas.width()*4./3., canvas.height()*4./3.) );
+}
 void Main::shrink()
+{
   canvas.setSceneRect( QRectF( 0,0, canvas.width()*3/4, canvas.height()*3/4) );
+}
 void Main::scale(double factor)
+{
   QMatrix m = editor->matrix();
   m.scale(factor, factor);
   editor->setMatrix( m );
+}
 void Main::zoomIn()
+{
   QMatrix m = editor->matrix();
   m.scale( 1.1, 1.1 );
   editor->setMatrix( m );
+}
 void Main::zoomOut()
+{
   QMatrix m = editor->matrix();
   m.scale( 0.9, 0.9 );
   editor->setMatrix( m );
+}
 void Main::print()
+{
   if ( !printer ) printer = new QPrinter;
   if ( printer->setup(this) ) {
     //    extern Mesh mesh;
     Vector bbll,bbur;
     mesh.BoundingBox(bbll,bbur);
 #ifdef QDEBUG
     qDebug() << "bbll = " << bbll << endl;
     qDebug() << "bbur = " << bbur << endl;
 #endif
     double cw = (bbur.x - bbll.x);
     double ch = (bbur.y - bbll.y);
     QPainter pp(printer);
     QRect vp=pp.viewport();
 #ifdef QDEBUG
     qDebug() << "Paper width = " << vp.width() << " x " << vp.height() << endl;
 #endif
     // Note that Cell is also translated...
     pp.translate(-bbur.x,-bbur.y);
     if (cw>ch) {
       pp.scale(vp.width()/(2*cw*Cell::Magnification()), vp.width()/(2*cw*Cell::Magnification()));
     } else {
       pp.scale(vp.height()/(2*ch*Cell::Magnification()), vp.height()/(2*ch*Cell::Magnification()));
+    }
     canvas.render(&pp, QRectF(), QRectF(0.,0.,canvas.width(),canvas.height()));
+  }
+}
 void Main::TimeStepWrap(void)
+{
   static int t=0;
   stringstream fname;
   TimeStep();
   t++;
   if ((par.export_interval > 0) && ((t % par.export_interval) == 0)){
     fname << par.datadir << "/" << par.export_fn_prefix;
     fname.fill('0');
     fname.width(6);
     fname << t << ".csv";
     this->exportCellData(QString(fname.str().c_str()));
+  }
   // check number of timesteps
   if (t==par.nit) {
     emit SimulationDone();
+  }
+}
 void Main::RestartSim(void)
+{
   stopSimulation();
   if ( QMessageBox::question(
 			     this,
 			     tr("Restart simulation?"),
 			     tr("Restart simulation.\n"
 				"Are you sure?"),
 			     QMessageBox::Yes | QMessageBox::No, QMessageBox::NoButton ) == QMessageBox::Yes ) {
     cerr << "Restarting simulation" << endl;
     //    extern Mesh mesh;
     mesh.Clear();
     Init();
     Plot();
     editor->FullRedraw();
+  }
   //startSimulation();
+}
 void Main::FitCanvasToWindow(void)
+{
   double scale_factor_x = (double)editor->width()/(double)canvas.width();
   double scale_factor_y = (double)editor->height()/(double)canvas.height();
   double scale_factor = scale_factor_x > scale_factor_y ? scale_factor_x : scale_factor_y;
   QMatrix m = editor->matrix();
 #ifdef QDEBUG
   qDebug() << "editor->width() = " << editor->width() << endl;
   qDebug() << "editor->height() = " << editor->height() << endl;
   qDebug() << "scale_factor = " << scale_factor << endl;
   qDebug() << "scale_factor_x = " << scale_factor_x << endl;
   qDebug() << "scale_factor_y = " << scale_factor_y << endl;
 #endif
   m.scale( scale_factor, scale_factor );
   editor->setMatrix( m );
   editor->show();
+}
 void Main::PauseIfRunning(void)
+{
   if (running) {
     timer->stop();
+  }
+}
 void Main::ContIfRunning(void)
+{
   if (running) {
     timer->start( 0 );
+  }
+}
 void Main::FitLeafToCanvas(void)
+{
   Vector ll,ur;
   mesh.BoundingBox(ll, ur);
   ll*=Cell::Magnification(); ur*=Cell::Magnification();
   // give the leaf some space
   Vector border = ((ur-ll)/5.);
   QRectF bb( ll.x - border.x, ll.y - border.y, ur.x-ll.x + 2*border.x, ur.y-ll.y + 2*border.y );
   // cerr << ur << ", " << ll << endl;
   // editor->fitInView(bb, Qt::KeepAspectRatio);
   editor->ensureVisible(bb);
   //editor->setTransform(viewport);
+}
 void Main::CleanMesh(void)
+{
   vector<double> clean_chem(Cell::NChem());
   vector<double> clean_transporters(Cell::NChem());
   for (int i=0;i<Cell::NChem();i++) {
     clean_chem[i]=par.initval[i];
     clean_transporters[i]=0.;
+  }
   mesh.CleanChemicals(clean_chem);
   mesh.CleanTransporters(clean_transporters);
   mesh.setTime(0);
   Plot();
   editor->FullRedraw();
+}
 void Main::CleanMeshChemicals(void)
+{
   vector<double> clean_chem(Cell::NChem());
   for (int i=0;i<Cell::NChem();i++) {
     clean_chem[i]=par.initval[i];
+  }
   mesh.CleanChemicals(clean_chem);
   mesh.setTime(0);
   Plot();
   editor->FullRedraw();
+}
 void Main::CleanMeshTransporters(void)
+{
   vector<double> clean_transporters(Cell::NChem());
   for (int i=0;i<Cell::NChem();i++) {
     clean_transporters[i]=0.;
+  }
   mesh.CleanTransporters(clean_transporters);
   mesh.setTime(0);
   Plot();
   editor->FullRedraw();
+}
 void Main::RandomizeMesh(void)
+{
   vector<double> max_chem(Cell::NChem());
   vector<double> max_transporters(Cell::NChem());
   for (int i=0;i<Cell::NChem();i++) {
     max_transporters[i]=0.;
     max_chem[i]=par.initval[i];
+  }
   // Amount of PIN1 at walls
   max_transporters[1] = 0.01;
   mesh.RandomizeChemicals(max_chem, max_transporters);
   Plot();
+}
 void Main::XMLReadSettings(xmlNode *settings)
+{
   MainBase::XMLReadSettings(settings);
   view->setItemChecked(com_id, showcentersp);
   view->setItemChecked(mesh_id, showmeshp);
   view->setItemChecked(border_id, showbordercellp);
   view->setItemChecked(node_number_id, shownodenumbersp);
   view->setItemChecked(cell_number_id, showcellnumbersp);
   view->setItemChecked(cell_axes_id, showcellsaxesp);
   view->setItemChecked(cell_strain_id, showcellstrainp);
   view->setItemChecked(movie_frames_id, movieframesp);
   view->setItemChecked(only_boundary_id, showboundaryonlyp);
   view->setItemChecked(fluxes_id, showfluxesp);
   view->setItemChecked(hide_cells_id, hidecellsp);
   options->setItemChecked(dyn_cells_id, dynamicscellsp);
   view->setItemChecked( cell_walls_id, showwallsp);
  // view->setItemChecked( apoplasts_id, showapoplastsp);
   editor->setTransform(viewport);
+}
 xmlNode *Main::XMLSettingsTree(void)
+{
   showcentersp = view->isItemChecked(com_id);
   showmeshp = view->isItemChecked(mesh_id);
   showbordercellp =  view->isItemChecked(border_id);
   shownodenumbersp =  view->isItemChecked(node_number_id);
   showcellnumbersp =  view->isItemChecked(cell_number_id);
   showcellsaxesp = view->isItemChecked( cell_axes_id );
   showcellstrainp = view->isItemChecked( cell_strain_id );
   movieframesp = view->isItemChecked(movie_frames_id);;
   showboundaryonlyp =  view->isItemChecked(only_boundary_id);
   showfluxesp = view->isItemChecked(fluxes_id);
   dynamicscellsp = options->isItemChecked(dyn_cells_id);
   showwallsp = view->isItemChecked( cell_walls_id);
   //showapoplastsp = view->isItemChecked( apoplasts_id);
   hidecellsp = view->isItemChecked( hide_cells_id);
   xmlNode *settings = MainBase::XMLSettingsTree();
   QTransform viewport(editor->transform());
   xmlAddChild(settings, XMLViewportTree(viewport));
   return settings;
+}
 void Main::exportCellData(QString fileName) {
 #ifdef QDEBUG
   qDebug() << "exportCellData fileName: " << fileName << endl;
 #endif
   QFile file(fileName);
   if ( file.open( IO_WriteOnly ) ) {
     QTextStream stream( &file );
     mesh.CSVExportCellData(stream);
     mesh.CSVExportMeshData(stream);
     file.close();
+  }
+}
 void Main::exportCellData() {
   QString fileName;
   Q3FileDialog *fd = new Q3FileDialog( this, "file dialog", TRUE );
   stopSimulation();
   fd->setMode( Q3FileDialog::AnyFile );
   if ( fd->exec() == QDialog::Accepted ) {
     fileName = fd->selectedFile();
     if ( QFile::exists( fileName ) &&
 	!QMessageBox::question(
 			       this,
 			       tr("Overwrite File? -- Cell Data"),
 			       tr("A file called %1 already exists."
 				  " Do you want to overwrite it?")
 			       .arg( fileName ),
 			       tr("&Yes"), tr("&No"),
 			       QString::null, 1, 1 ) ) {
       this->exportCellData(fileName);
+    }
+  }
   this->exportCellData(fileName);
+}
 /* finis */

0 comments (0 inline, 0 general)